Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Servo / stick reversal  (Read 1386 times)

LB

  • Guest
Servo / stick reversal
« on: April 05, 2010, 02:58:17 pm »

Hello All

Can any one assist?

I`m using a Robbe Navy F14 twin stick Tx on a tug with twin shottel drives.  Problem - the right stick is mov in the opposite direction to the shottel drives.  Is it possible to reverse either the stick or the servos?

Any advice would be appreciated.

Regards,

LB
Logged

barriew

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,111
  • Location: Thaxted, Essex
Re: Servo / stick reversal
« Reply #1 on: April 05, 2010, 03:07:42 pm »

I dont have that Tx, but as its top of the range %% it MUST have a servo reversing facility,

Barrie
Logged

Shipmate60

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 5,806
  • You bark - I will bite!!!
  • Location: Fareham
Re: Servo / stick reversal
« Reply #2 on: April 05, 2010, 03:11:09 pm »

The Servo Reverse switches are in the battery compartment if my memory serves me right.

Bob
Logged
Officially a GOG.

BarryM

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,701
  • Location: West Lothian
Re: Servo / stick reversal
« Reply #3 on: April 05, 2010, 04:28:58 pm »

Take off the back and look for the plugs/sockets numbered 1 to 8 and 1 to 3 on the left of the circuit board. Identify the plug for the stick you want to reverse, unplug it, turn it through 180 deg and plug back in again.
Simples!

Barry M

PS Do you have a copy of the Manual?
Logged

LB

  • Guest
Re: Servo / stick reversal
« Reply #4 on: April 05, 2010, 06:17:27 pm »

Dear All

Many thanks for the responses.

Barry M - spot on, switching the lead has worked a treat

Once its all done I`ll post some pics.

Has anyone built a Tito Neri model - if so do you have any pics, particularly the wiring?

Regards

LB
Logged
Pages: [1]   Go Up
 

Page created in 0.087 seconds with 23 queries.