Had a couple of days break from building up sixteen tiny Bofors AA 40mm guns, it was driving me mad!
I had a bit of a move round of the radio gear, I'd noticed that the servo arm of the forward gun turret servo was rubbing on the forward deck section, so a slight alteration was called for.
The two 280 motors arrived, so I've fixed them in position. I used a drop of superglue on the motor case and attached them to an 1" long section of the tapered end of a clothes peg, then a drop of silicone sealant fixes them in postion nicely. Not quite permanantly, you get them out if needs be, but I don't plan to move them.
The couplings are made from a slice of rubber tube (not shown in the pics) and everything seems to line up nicely, both motors run quietly and smoothly.
Next job is complete the motor installation by wiring everything up, then it'll be back to building 40mm AA guns....
Rich