Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[RODDERS]

Hi All
  I'm using super glue for sticking of superstructure(plasticard/aly/card etc) BUT I'm finding that it tends to leave a white "smokey" residue if I stick clear plastic,or indeed anything with a shiny surface. Im sure you guys will know what the best stuff is to use to prevent the white marks?
   Thanx in advance..Rod

[maninthestreet]

Polystyrene cement (in the liquid form with a brush) is the normally recommended for plasticard.
Avoid superglue for use with clear/shiny plastic - try R/C Modellers Glue from Deluxe Materials:

http://www.deluxematerials.com/boatmodelling.html

[walktheplank]

maninthestreet is right, dont use super glue. I use a Plastic weld for Styrene, ABS, etc,  But for clear try a Canopy glue as this does not leave any Smokey fumes. sonic.

[barriew]

You can remove most of the smokey residue from clear plastic with meths. It is also possible to buy super glue which will not cause this effect

Barrie

[StarLocAdhesives/FiveStar]

If using a superglue type, use an odourless cyanoacrylate, they dont fog windows as they give off no vapour, for non superglue type a canopy glue is best.

[RODDERS]

Thanx guys,I knew youd have some ideas!