Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Huntsman brushless motors  (Read 4821 times)

Stavros

  • Guest
Huntsman brushless motors
« on: December 19, 2008, 08:14:37 PM »

HELP HELP HELP


Right then I have 2 options I either go twin motors or a single it is the 43 inch wooden hull no propshafts have been fitted.I would like to run on 2 x 12v stick packs,one for each motor what do you suggest or think.Running time of around 20 Min's would be good but I want it to fly



Stavros
Logged

debssnal

  • Guest
Re: Huntsman brushless motors
« Reply #1 on: December 20, 2008, 09:50:35 AM »

Hi Stavros here is what you need
Motors 2x Tornado Thumper 4250 Brushless motor - 720 watt motor, 600 kv @37.97 each
link for motors http://www.overlander.co.uk/category.asp?cid=10&scid=85
ESC'S 2x XC80A Continue with BEC
link for esc's http://cgi.ebay.co.uk/Programmable-Brushless-Car-ESC-XC80A-Continue-with-BEC_W0QQitemZ290252517529QQihZ019QQcategoryZ34056QQtcZphotoQQcmdZViewItem
Run 2x 4 bladed props 50-55mm.
It will go well with one motor,but with 2 it will go like stink
The esc's are forward and reverse and self programming.
hope this is of some help to you
kind regards

Alan
Logged

FullLeatherJacket

  • Guest
Re: Huntsman brushless motors
« Reply #2 on: December 20, 2008, 11:44:31 AM »

Stavros
Barry Boy has an alternative installation which uses Darke Horse 2.5:1 geared 785 motors on 18v. These work out at about the same price and power as the Thumper brushless jobbies and you can use any "normal" ESC to get full forward and reverse control. Maybe save yourself a few bob and raid your Electronize cupboard?
Steve J is a very happy chappie with his model.......and it doesn't even have any of our stuff in it!
PM me for further info if you like.
FLJ
Logged

Stavros

  • Guest
Re: Huntsman brushless motors
« Reply #3 on: December 20, 2008, 06:33:32 PM »

Now FLJ will you stop swearing on this forum I take offence to that product yopu know dammed well I am an Action man
Totally forgot abotu the dark horse motas
I am looking to use them in another Huntsman which is like me overweight!!!!!!!!!!!!
I think I will have to just have a play with these brushless motors just got to be done



Stavros
Logged

Stavros

  • Guest
Re: Huntsman brushless motors
« Reply #4 on: December 20, 2008, 06:37:37 PM »

Thanks a lot Alan wish I had known info this afternoon as a Model Shop in Maidstone has those motors in for 27,never mind a job for Barty 230 to go and collect



Stavros
Logged

FullLeatherJacket

  • Guest
Re: Huntsman brushless motors
« Reply #5 on: December 20, 2008, 10:58:08 PM »

Stavros
Go for it .........but report back to base, dude.
FLJ

(Sorry for using the "E" word. Just trying to be even-handed!)
Logged

pt109

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 29
  • Location: liverpool
Re: Huntsman brushless motors
« Reply #6 on: December 23, 2008, 07:05:49 PM »

Hello

I've searched the forum, and cannot find any recommendations for the 34" Huntsman, its always for the larger one

Can anyone suggest a suitable motor for it and power source, intending on single motor, fibreglass hull, but it needs to have a fair turn of speed.

What can anyone suggest - starting with a clean sheet so open to any suggestions, and have no brand loyalties

Trevor

Logged

Stavros

  • Guest
Re: Huntsman brushless motors
« Reply #7 on: December 23, 2008, 07:32:56 PM »

Hi Trevor why not go the same route as Me , use 1 of the motors that have been reccomended




Stavros
Logged

banjo

  • Guest
Re: Huntsman brushless motors
« Reply #8 on: April 05, 2009, 06:49:43 PM »

 {-)
Hi Peeps,

Some help please....  There is a guy on our pond who has been terrorising my RC Laser with his very fast Graupner JULES VERNE.  I want to be able to ZAP him with my Huntsman re-fitted with a suitable brushless motor in place of the 700 BB in it at the moment.
This, I know, sounds very childish, but it would give me some personal satisfaction!!

Stavros... have you got the magic ingredients?

Regards,

alan
Logged

Shipmate60

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 5,263
  • You bark - I will bite!!!
  • Location: Fareham
Re: Huntsman brushless motors
« Reply #9 on: April 05, 2009, 06:53:27 PM »

Nomustangmark sells a motor which on 18 volts will make her go well.

Bob
Logged
Officially a GOG.

Stavros

  • Guest
Re: Huntsman brushless motors
« Reply #10 on: April 05, 2009, 07:50:00 PM »

{-)
Hi Peeps,

Some help please....  There is a guy on our pond who has been terrorising my RC Laser with his very fast Graupner JULES VERNE.  I want to be able to ZAP him with my Huntsman re-fitted with a suitable brushless motor in place of the 700 BB in it at the moment.
This, I know, sounds very childish, but it would give me some personal satisfaction!!

Stavros... have you got the magic ingredients?

Regards,


yes see reply 1



Stavros

alan
Logged

banjo

  • Guest
Re: Huntsman brushless motors
« Reply #11 on: April 05, 2009, 08:08:25 PM »

 :}

Thank you...

 O0
Logged

banjo

  • Guest
Re: Huntsman brushless motors
« Reply #12 on: April 06, 2009, 06:27:29 AM »

 :}

Has anyone bought one of these?


Logged

banjo

  • Guest
Re: Huntsman brushless motors
« Reply #13 on: April 06, 2009, 06:27:29 AM »



 O0
Logged

debssnal

  • Guest
Re: Huntsman brushless motors
« Reply #14 on: April 06, 2009, 07:18:46 PM »

Hi Banjo,the esc,s you need are on this link    http://cgi.ebay.co.uk/Seaking-60A-Waterproof-Brushless-ESC-for-RC-Boat-UK_W0QQitemZ330319995175QQcmdZViewItemQQptZUK_ToysGames_RadioControlled_JN?hash=item330319995175&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318
they are alot better than the one on your link.you can run them up to 22.2volts
hope this is of some help to you.
kind regards
Alan
Logged

banjo

  • Guest
Re: Huntsman brushless motors
« Reply #15 on: April 06, 2009, 09:03:13 PM »

 O0

TYVM
Logged
Pages: [1]   Go Up