Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: RC question  (Read 1210 times)

andra

  • Guest
RC question
« on: August 01, 2009, 06:27:00 pm »

RC question

I have built am RC model fishing boat
All is well except when I go full throttle on 12v the rudder turns hard right when rudder stick is central.
It is OK on 6v.
Electrics -   2x 6v lead acid batteries- MFA 919D series motor with 2.5 to 1 gearbox
Futaba 2ch Trans. & Rec.- Futaba 3003 servo - waterproof Marine ESC-50 6v-12v 50amp fwd 20amp rev. BEC 5v/1amp- Low batt. Cut off 5v
Many thanks
Andra

Logged

knoby

  • Guest
Re: RC question
« Reply #1 on: August 01, 2009, 07:39:57 pm »

Hi Andra,
I would suspect you are getting interference from the motor with the increase in power & rpm. Have you got suppressors on your motor? try a search on motor suppression there are several threads on here

cheers Glenn
Logged

andra

  • Guest
Re: RC question
« Reply #2 on: August 01, 2009, 08:34:52 pm »

Many thanks I will try that
Logged
Pages: [1]   Go Up