Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: 40" Twin outboard cat  (Read 2805 times)

F1 madness

  • Guest
40" Twin outboard cat
« on: November 28, 2010, 02:47:28 PM »

been working on this build for awhile now,been waiting ages for the 2nd OS leg to arrive before continuing the build,and now has finally arrived.
Some pics of build just to recap:



And a couple with the 2  OS legs on


Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #1 on: November 29, 2010, 03:27:54 PM »

 Iv  been looking at these and wondering if a pr of these would be awesome on 7s or 8s  on each,spining a pr of counter rotating props 45mm,1.7mmp 3 blades

Leopard 4082/b 1500   
 Specification:
cells 4-9s lipo
Max Voltage 33v
Max Amp: 120A
Max power: 3500W
RPM: 1500KV/volt
Resistance: 0.0075
Non-load current(7.4V): 2.2A
Diameter: 40.2mm
Length(excluded shaft): 82mm
Mount hole depth: 7mm
Shaft diameter: 5mm
Shaft lenght: 20mm
weight: 485 gm
Logged

brodjack

  • Guest
Re: 40" Twin outboard cat
« Reply #2 on: November 29, 2010, 07:17:21 PM »

Awesome wont be a strong enough word to describe it with 2 of those motors 8)

Looks fabulous :-))
Logged

gregk9

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,261
  • Location: West Midlands
    • Chasewater Model Boat Club
Re: 40" Twin outboard cat
« Reply #3 on: November 29, 2010, 11:26:14 PM »

Trouble is, what lake's long enough to get it up to full speed eh? [ha ha].
Logged
Best wishes.

Steve. G.
Treasurer & Membership Secretary:  Chasewater Model Boat Club
http://chasewatermbc.blogspot.com/

martno1fan

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,506
  • Location: Blackpool
Re: 40" Twin outboard cat
« Reply #4 on: November 30, 2010, 08:50:32 AM »

As allways Daz your works simply awesome,leccy isnt my thing i have no clue about what you just posted but im looking forward to seeing this one go.This cat may be another candidate for scaling up for us gas guys  ok2.Still think the bow may need more slope to it for downforce but i know this is just the prototype and you will make any changes needed  ok2,she looks stunning as do all your designs.
Mart
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #5 on: November 30, 2010, 12:26:03 PM »

Awesome wont be a strong enough word to describe it with 2 of those motors 8)

Looks fabulous :-))

She sure should be,and will look stunning
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #6 on: November 30, 2010, 12:27:54 PM »

Trouble is, what lake's long enough to get it up to full speed eh? [ha ha].


im sure once the main lake has been refilled im sure it will be more than big enough,but for now ill use the pool and canal.
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #7 on: November 30, 2010, 12:33:52 PM »

As allways Daz your works simply awesome,leccy isnt my thing i have no clue about what you just posted but im looking forward to seeing this one go.This cat may be another candidate for scaling up for us gas guys  ok2.Still think the bow may need more slope to it for downforce but i know this is just the prototype and you will make any changes needed  ok2,she looks stunning as do all your designs.
Mart

Cheers mart,basically some serious leccy power,3500 watts in gasser terms is 4.6HP x that by 2,once setup right and alls well with the design it should give most gassers a run for the money,just not the run times LOL.
Will see how this 1 performs and i will redisn once i know what else will need changing,but this is the 1st cat iv designed and built so trial and error,then rebuild LOL
Logged

martno1fan

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,506
  • Location: Blackpool
Re: 40" Twin outboard cat
« Reply #8 on: November 30, 2010, 02:18:32 PM »

flipping eck i think your gonna need a bigger boat lol  O0
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #9 on: November 30, 2010, 02:33:10 PM »

 {-) {-)im hoping to hit the 60mph mark so will have to wait and see
But i think a nice twin inboard would be awesome aswell %)
Logged

brodjack

  • Guest
Re: 40" Twin outboard cat
« Reply #10 on: November 30, 2010, 03:46:18 PM »

design a 47-50" cat for a stroker 31 Zenoah,i'd buy one in a flash,even if it was wood.. O0
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #11 on: November 30, 2010, 04:21:44 PM »

design a 47-50" cat for a stroker 31 Zenoah,i'd buy one in a flash,even if it was wood.. O0

designing 1 wont be a problem,but would need the hardware,engine etc to build round as iv only built leccy  1s.
In fact iv got an awesome sleak design for 1 in my head.
im also looking @ designing and building gasser F1s and nothing defo yet but maybe teaming up with some1 to make thse hulls,got loads of ideas and designs and time just not the funding yet.
Logged

rathikrishna

  • Guest
Re: 40" Twin outboard cat
« Reply #12 on: December 01, 2010, 09:41:47 AM »

Sir..its a crazy one..thanks for sharing...will you add some videos..?
Logged

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #13 on: December 01, 2010, 10:06:56 AM »

Yes bud will add some as soon as i can get it finished and on the water :-))
Logged

Martin [Admin]

  • Administrator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 19,092
  • Location: Peterborough, UK
    • Model Boat Mayhem
Re: 40" Twin outboard cat
« Reply #14 on: December 01, 2010, 12:41:45 PM »

Will you need a flying licence for her?!?!?  :o
Logged
"This is my firm opinion, but what do I know?!"    -   Mayhem FaceBook Group!

F1 madness

  • Guest
Re: 40" Twin outboard cat
« Reply #15 on: December 01, 2010, 12:52:28 PM »

LOL only if she takes off  {-)
Logged

martno1fan

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,506
  • Location: Blackpool
Re: 40" Twin outboard cat
« Reply #16 on: December 01, 2010, 03:39:23 PM »

If this weather keeps up you might need wheels  O0  :}
Logged

rathikrishna

  • Guest
Re: 40" Twin outboard cat
« Reply #17 on: December 02, 2010, 03:04:28 PM »

Oh..nice..will wait for it...sure it will be a great one...then roooooorrrrrrrrrrrr......have a nice time to finish it...
Logged
Pages: [1]   Go Up