The boat club iv joined locally to me were on about having their own 500 series class,and asked me if i would like to design somthing for them.
We spoke some more and could nt decide on what style of hull they wanted and left it upto me,so what i decided was if i was to design and build 3 types of hull then we could put it to the vote.
They wanted somthing a little more modern than the brushed series cab cruiser style that nearly all the other clubs run.
The 3 types of hull im working on is a cat,F1 and a mono but these would be designed to run all the same motor,esc,prop,and hardware (strut and rudder assembly) etc.
Iv got do it as cheap as possible for it to be cost effective for the members.
This is what iv got so far:
Hor hardware.
31mm prop
80amp rc max esc
2845,3600 kv,watercooled inrunner motor but also looking at a 450 Heli 2415-07T Brushless Motor 3850kv
2s 3000mah 35c Lipo
iv also got HOR water cooled mount if we decide to go outrunner motor as well as just a normal mount.
Still got to decide whether to use a standard servo or mini servo either which will be metal geared.
Heres the pics of the 1st im building.
Hardware: