Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: TAYCOL MOTOR  (Read 2192 times)

taximart

  • Guest
TAYCOL MOTOR
« on: April 14, 2011, 09:43:13 pm »
Hi everyone, I have just aquired an original Aerokits Sea Queen built in the 1950s it requires some rebuilding and it is fitted with a
Keil Kraft Taycol motor called the supermarine it has brushes and runs off 8-12volts. what I would like to know if anyone can help is what kind of speed control would it work with.Thanks . Martin.
Logged

john s 2

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,172
  • Location: Southend on Sea Essex
Re: TAYCOL MOTOR
« Reply #1 on: April 14, 2011, 10:18:15 pm »
Dodgy Geezer has set up a website for Taycol Motors.Hes done an excellent job.
http://taycol.hobby-site.com/install.html. This site should answer All your questions. You can also use the
Mayhem search facility to find out posts on Taycol. John.
Logged

taximart

  • Guest
Re: TAYCOL MOTOR
« Reply #2 on: April 15, 2011, 08:37:15 am »
Thanks John for your info. I went to the site and it tells me all I want to know. Regards Martin
Logged

kiwimodeller

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 622
  • Location: Waihi, New Zealand
Re: TAYCOL MOTOR
« Reply #3 on: April 15, 2011, 10:45:59 am »
I have an original Sea Queen running with a Taycol motor and modern radio control. It took a bit more effort to sort it out but it was well worth while and now you have all the info from Dodgy's website plus what is on Mayhem it should be straight forward. The main thing is to use every form of suppression known to mankind! Best of luck and dont forget to post before and after photos on here. Cheers, Ian.
Logged

Circlip

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 4,464
  • Location: North of Watford, South of Hadrians wall
Re: TAYCOL MOTOR
« Reply #4 on: April 15, 2011, 01:43:35 pm »
Quote
The main thing is to use every form of suppression known to mankind

  Most suppressive form I've found for these is a piece of Hickory about ten inches long, let into a piece of cast steel weighing aproximately seven pounds. %) :-))


    Regards  Ian.
Logged
You might not like what I say, but that doesn't mean I'm wrong.
 
What I said is not what you  think you heard.

Arrow5

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,873
  • Location: Scottish Highlands
Re: TAYCOL MOTOR
« Reply #5 on: April 15, 2011, 01:57:19 pm »
How about a bigger swing at it ?
Logged
..well can you land on this?
Pages: [1]   Go Up
« previous next »
 

Page created in 0.087 seconds with 22 queries.