A few questions me Lud!
1. When the whole thing cuts out, is anything red hot?
2. Do all the controllers cut at exactly the same time?
3. How many channels on the radio are you using to control the 3 ESC? (Electronic Speed Controller)
4. Are the ESC's link together on the radio side of things?
5. Does the rudder still work after the ESC cut out?
6. What radio make are you using?
7. where was on the night in question? Do you have alibi?
Hi, is answer to your questions
1. No nothing gets hot or slightly warm
2. I run both the outside motors together so when it happens they both go off at the same time, also the center does the same.
3. Just the 1 channel the center prop comes in via a Fleet relay, the 2 outside props are linked with a Y connector to the reciver.
4. As above
5. Yes the reciver has its own power supply, I have removed all the red wires from the ESC
6. I use a Futaba 10EXP
7. I wasn't there you can't prove it you have nothing on me!!
Cheers Tom