ive recently purchased a second hand kingston mouldings sun tug that has lots of build faults , ive now started on a complete refit , im keeping the supplied motor / gear box ( pitman with 5.9 : 1 box installed ) but have shortened the prop shaft , moved the motor further aft and have made a kort nozzel to replace the rudder , i shall also fit a small raboesch bow thruster , what im looking for is a towing hook that will not bend / fall apart when i put a load onto it ? the five towing bollards mounted through the deck are now made from brass tubing glassed into the hull & resin filled ! is there a recomended supplier for the main hook or do i need to fabricate my own ? jon