Topic: The Lady Wooes tug build (Read 30552 times)

Tug-Kenny RIP · « **Reply #50 on:** October 22, 2011, 11:32:43 am »

I'm hoping to wash it with trichloroethane later. I hope she doesn't notice.

Nice to hear from you Derek. Going to try for a sail tomorrow. Might take some pics.

ken

Tug-Kenny RIP · « **Reply #51 on:** October 22, 2011, 08:59:36 pm »

Anyone know the colours of the three vertical lights on the main mast please. ?

ken

Ps ....

I've found out from Brian Young's post in 2007 (yes I'm thorough ) that all Tug mast lights are White

Thank you Brian.

A mine of information.

ken

Tug-Kenny RIP · « **Reply #52 on:** October 23, 2011, 05:41:59 pm »

Today I've been busy fitting the supports for the upper Bridge house. I've cut the handrail to go around the front wind break. Twice as it turned out because it didn't hold very well on the thin plastic. I had to fit a wooden bar on the inside edge to make the support wide enough to support it.

I then made some more riveted strips and glue them in position.

Tug-Kenny RIP · « **Reply #53 on:** October 23, 2011, 05:47:25 pm »

Now I'll have to paint it white to cover the sticky finger glue marks.

I then made two rung type ladders and glued them together. The lifeboat rope fittings were then put into place and some oars found that did the job, so were painted white.

As an aside, I ended up with super glue all over my finger tips and tried the Wife's nail varnish remover. Not a success, so filed down my fingers to clear the stuff !! Any suggestions please.

Shipmate60 · « **Reply #54 on:** October 23, 2011, 05:51:00 pm »

Kenny,
You can buy superglue release agent.
It is good, but degreases your skin very very too.

Bob

Tug-Kenny RIP · « **Reply #55 on:** October 23, 2011, 05:56:25 pm »

Ah!! I thought there might be something Bob. I managed to get a lot on my skin this time and it spoils my Piano playing.

What happened was that the bridge supports are hollow square tubes. When I super glued the top section and turned them to fit vertically, it all ran down the tube straight onto my hand.

Go on start the name calling

ken

Netleyned · « **Reply #56 on:** October 23, 2011, 05:57:05 pm »

Play a guitar finger style
Half an hour and it's gone

Ned

Tug-Kenny RIP · « **Reply #57 on:** October 23, 2011, 05:58:17 pm »

We piano playing types have softer fingers.

ken

Tug-Kenny RIP · « **Reply #58 on:** October 25, 2011, 03:53:32 pm »

The ladders have been painted (why did I choose black ?) and fitted. Might have to change the colour.

Tug-Kenny RIP · « **Reply #59 on:** October 25, 2011, 03:55:26 pm »

The portholes have been fitted.

Tug-Kenny RIP · « **Reply #60 on:** October 25, 2011, 03:57:58 pm »

Finally for today I've made a little Fire hose hose box and found some tiny letters to stick on. probably not the correct font, but looks great anyway.

Norseman · « **Reply #61 on:** October 25, 2011, 11:55:26 pm »

Lovely work there Kenny - and I really like that brown paint you have used; what is it?

Norseman

Tug-Kenny RIP · « **Reply #62 on:** October 26, 2011, 11:09:32 am »

Hi Norseman

The Brown paint was Triumph Russett Brown.

I shown my recommended best white for boats and that is Vauxhall Glacier white. This shows the best white because there can so may shades. Some can make the boat quite drab.

Hope this helps. I'm off to repaint those ladders a light brown. Couldn't sleep for worrying about them.

Ken

Tug-Kenny RIP · « **Reply #63 on:** October 29, 2011, 05:48:51 pm »

I've been busy fitting the railings and the tiny pieces like air vents. Thank you 'Mastermind game' for the correct shaped mushroom tops.

I've rigged the lifeboats and had nowhere to rig the ropes so I've made some cruciform bollards and waiting for the paint to dry.

The masts have been wired up and the lights fitted. Now glued into the boat and ready to connect. The light show is next blog.

16 lamps so far and coming along nicely. Oh, and I've put on her name . I think we're nearly there.

Tug-Kenny RIP · « **Reply #64 on:** October 30, 2011, 08:00:17 pm »

The Launch

Well it was off to the lake today as the weather was great. She tested out wonderful and the power was quite remarkable.

She sits quite high at the moment because I still need another 12 volt battery and smoke machine, with it's water, to bring her down a bit more.

I took some movies and joined them up for my 'You Tube' film which I then spent the afternoon making.

Lady Wooes .... http://www.youtube.com/watch?v=rFvVpzmg8hk

Here's the final 'stills'

Thank you for following this build for tomorrow we start the "Gry Maritha"

ken

craftysod · « **Reply #65 on:** October 30, 2011, 09:14:44 pm »

Great video Ken,lovely build,
Thanks for sharing.
Mark

P.S what is the soundtrack for the first part of the vid,very calming

Tug-Kenny RIP · « **Reply #66 on:** October 30, 2011, 09:33:32 pm »

Thank you Mr Crafty.

The music is 'Meditation' and I think it's by 'Thais' and is a modern take. I'm not sure where my collection came from. (I'm sure You Tube will let me know for any copyright issues.) I'm working on the theory of out of date music.

ken

ps you could tape it from the film before they rap my knuckles.

craftysod · « **Reply #67 on:** October 30, 2011, 09:47:50 pm »

You are correct Ken it is meditation by thias,just checked on you tube.
But cannot find the correct copy you have.
How do i copy from your soundtrack.
Sorry to sound stupiid,dont use youtube,only to watch.
Now i would never of thought i would listen to an opera piece,how wrong can i be.
Mark

Tug-Kenny RIP · « **Reply #68 on:** October 30, 2011, 09:54:17 pm »

It's 5 megs on my machine so I can't send it to you. My only suggestion is to use a sound recording device with microphones. Either tape or disk.
It is possible to save a You Tube film but this is beyond me as well.

regards

ken

craftysod · « **Reply #69 on:** October 30, 2011, 10:09:50 pm »

Thank you anyway Sir,
Its a pleasure to watch your builds,and the way you present it on the net,with appropriate music.
Regards
Mark

Tug-Kenny RIP · « **Reply #70 on:** October 30, 2011, 10:18:34 pm »

Cheers kind Sir. You will have noticed my Avatar is Keyboardken. Years of mending Organs and keyboards.

ken

Norseman · « **Reply #71 on:** October 30, 2011, 11:40:11 pm »

Hey Kenny

Re 5 meg so can't send - don't send - use Dropbox

http://www.dropbox.com/

Regards Norseman

Tug-Kenny RIP · « **Reply #72 on:** October 31, 2011, 10:35:33 am »

That's a new one on me. What a good idea. Always wanted a site like this.

Will look into it.

cheers

Ken

Norseman · « **Reply #73 on:** October 31, 2011, 03:29:25 pm »

Hey Kenny

It downloads easy and I have used it to pick up hull plans (real ones) from a guy in America. He put the stuff in the box and just sent me a link to it - I took them out the box - simples

. I haven't tried putting stuff in yet but I am going to try that for Carl (that's Carlmt on here I think) soon.

Norseman

pdryden · « **Reply #74 on:** November 03, 2011, 05:27:27 pm »

Quote from: Tug---Kenny on October 30, 2011, 09:33:32 pm

Thank you Mr Crafty.

The music is 'Meditation' and I think it's by 'Thais' and is a modern take. I'm not sure where my collection came from. (I'm sure You Tube will let me know for any copyright issues.) I'm working on the theory of out of date music.

ken

ps you could tape it from the film before they rap my knuckles.

Hi,

Its Meditation from the Opera Thais by the composer Massenet.

Right enough it is a lovely piece of Music, seeing as Kenny likes his Organs, I have Reg Dixon playing it, along with others, Von Suppes Poet and Peasant Overture on the Blackpool Wurlitzer.

Peter.

News:

Author Topic: The Lady Wooes tug build (Read 30552 times)

craftysod

craftysod

craftysod