All the lead and the motormount too have been 'glued' into place with silli-sealer,I'm even experimenting doing the same with the servo. Once the sealer has cured,I'll be adding a small battery box and possibly a shelf to fit the ESC and receiver to. The good thing is,that the 30mm prop provides more than enough power for this little tug. The only real downside to this model is it's rudder,as it's like a barn door in thickness,over an 1/8" in thickness. However,I said to myself,'self,you're not buying any more bits for this build',that I'd try out the kit parts first,except for the proptube,and then after testing decide whether or not to modify some of the parts.
Colour wise,I'm not too sure,red oxide on the lower hull certainly,with black above,but it's the superstructure colours that have me stumped just now. I have White,Dark Blue,Black and Sand available to me plus a dark green somewhere. Any ideas gentlemen?