I'm looking for some assistance from those with knowledge of radios receivers and such. I installed one of ACTION's P94's in my Smit Nederland and it performed superbly. I'm doing over a Drumbeat of Devon I got from a friend. I added my own motors, battery etc. and I'm using the successful control panel from the Nederland. I have both vessels set up with the same plug arrangement to servo(s), motors and battery. I plugged the motor control panel into the Drumbeat and the motors could not be made to stop and there was substantial interference with the servo operation.
The motors would go full forward to full reverse extremely rapidly with no control from me (yes my transmitter was turned on) and I couldn't find a bias on either throttle or steering that would settle the whole lot down. I reinstalled the panel in the Nederland and all was well.
What am I missing in the Drumbeat installation that's making it go wonky?
Any assistance greatly appreciated.
Thanks
John
Drumbeat motors
Control panel in the Nederland