Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Another 209-1200  (Read 3268 times)

Wehrbier

  • Guest
Another 209-1200
« on: December 23, 2011, 05:36:38 pm »

The reason was Yannis.  :} The first time as I saw his pics, I startet to plan this sub for my next project. So I got contact with Yannis and after a while we made a deal. Till the parts are ready I started to draw the technics with CAD. 


Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #1 on: December 23, 2011, 05:43:32 pm »

The next step was to make the technic frames. A friend got a CNC portal mill. So I send him the data and we made a weekend mill session.

regards

Sascha
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #2 on: December 23, 2011, 05:50:44 pm »

The last weekend I started to assembling the parts. If they are CNC milled that goes very fast, because each part is very exact. So I made some turning brass parts like the bearing bush and some nuts. The batteries later lie between the brass bars in the middle. You can also see the compressors. The diving system will work with compressed air. We subscribed it a few posts ago. If you want to know something feel free to ask.

regards

Sascha
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #3 on: December 24, 2011, 03:17:54 pm »

The last days I assembled the main ballast tank. In the box are the scopes later. The box itself is dry.

regards

Sascha
Logged

Patrick Henry

  • Guest
Re: Another 209-1200
« Reply #4 on: December 24, 2011, 04:10:04 pm »

Wonderful work, sir...


Rich
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #5 on: December 26, 2011, 09:02:42 pm »

Yannis` parts arrived, excellent work!!!

regards

Sascha
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #6 on: January 02, 2012, 06:23:50 pm »

Today I arranged all hullparts together. So I can see if everything works as I want. I think she will be a great sub  O0

best regards

Sascha
Logged

Patrick Henry

  • Guest
Re: Another 209-1200
« Reply #7 on: January 02, 2012, 09:01:09 pm »

Looking good so far...!




Rich
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #8 on: January 14, 2012, 09:02:21 am »

In case of an crash or hard touch with the pond wall, the fix part of the rudder (dont know the right word) can be destroyed. So I made the desicion to build the parts new with 2.5mm fiber glass inlays. I made some silicon molds and made the rudder parts in resin with cotton flocc. I also build the rudder bearings. It seals with two O-Rings. 

regards

Sascha
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #9 on: January 14, 2012, 09:03:46 am »

More pics...
Logged

Wehrbier

  • Guest
Re: Another 209-1200
« Reply #10 on: February 04, 2012, 09:06:07 pm »

Small CAD update. I try to made one module for motormount, servos and speedcontroller. So I planned a ring that is bonded with the stern. There are 4 thread bolt in the ring to hold the complete module.

regards

Sascha

Logged

Wehrbier

  • Shipmate
  • *
  • Offline Offline
  • Posts: 4
  • Location: Germany
Re: Another 209-1200
« Reply #11 on: April 19, 2012, 08:36:25 am »

Update. The Servomudule is complete and I start to build the small deck. Some pics:









regards

Sascha
Logged
In omnia paratus!

Subculture

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 4,187
  • Location: North London
    • Dive-in to Model submarines
Re: Another 209-1200
« Reply #12 on: April 19, 2012, 07:19:35 pm »

Very tidy.
Logged
Pages: [1]   Go Up
 

Page created in 0.137 seconds with 22 queries.