Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[deerstalker36]

Ok, first (ish) post....

i've been reading up on how to put the deck on my 1/96 Cherry B. I can see how to put a flush deck using a rim around the inside of the hull, but how would i make the rounded off deck edge of a leander. 
would i fit a flush deck then add another layer slightly wider incorporating the round off of the deck?

cheers

Colin

[Apollo]

It's probably the only deck that you would mount on top of the hull then round off.

Regards,

Apollo

[rnli12]

Hi,

Put a balsa square block attached to the hull sides and deck at the desired height then just sand down to correct profile. Or plasticard.

Rich F87