Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Fairy Power Spray Applications?  (Read 2718 times)

BarryM

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,701
  • Location: West Lothian
Fairy Power Spray Applications?
« on: November 08, 2012, 09:49:20 am »

Fairy Power Spray has been recommended for paint removal but will it remove all paints or just some specific types and does it affect plasticard?
Thanks for all replies.
Barry M
 
Logged

tt1

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,752
  • If I only know a little - then I can learn a lot
  • Location: Leicestershire
Re: Fairy Power Spray Applications?
« Reply #1 on: November 08, 2012, 01:02:32 pm »

Hi Barry due to the number of unacceptable and at times disastrous finishes I've ended up with during (and continuing !) my learning curve to modelling, I've bought and tried many of these proprietary cleaning type products without achieving anything that you could call a success. No doubt there must be people who may have had their successes which may attribute to the type of paint / number of coats applied etc etc but I've not found anything that really works without affecting or damaging the original surface.I use the popular acrylics and car sprays.  I've also tried "specialist strippers" which has not impressed me and usually entails more time in applying a number of coats, a lot of time to 'soak' and a fair amount of mess. However I'll tag along to this thread, could well learn a few nuggets of wisdom.
                                             Regards, Tony.
Logged

Netleyned

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 9,051
  • Location: Meridian Line, Mouth of the Humber
    • cleethorpes mba
Re: Fairy Power Spray Applications?
« Reply #2 on: November 08, 2012, 02:33:23 pm »

I have stripped the hull of a Victoria yacht {Styrene} which looked like it had been hand painted with enamel.
No problems with the spray on the hull.
I have just stripped a fibreglass cygnus hull that had a coat of automotive primer as antifouling and it did the same
great job.
Again no problems with the coloured gel coat.
Stavros is the man with the best advice.


Ned
Logged
Smooth seas never made skilful sailors
Up Spirits  Stand fast the Holy Ghost.
http://www.cleethorpesmba.co.uk/

goBulawayo

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 368
  • Location: West Wales
Re: Fairy Power Spray Applications?
« Reply #3 on: November 08, 2012, 06:21:18 pm »

I have used it successfully with plastic model kits, usually to remove humbrol/revell type enamels - I think I may have used it on humbrol acrylics too and I don't recall it not working for that - As for non model type paints I have no idea

Wayne
Logged

Stavros

  • Guest
Re: Fairy Power Spray Applications?
« Reply #4 on: November 08, 2012, 07:58:06 pm »

Fairy Power spray gets MY VOTE  :-)) :-)) :-)) :-))  every time,it does not seem to effect styrene,wood or Grp,I have found it excellent for dissolving paint off parts !!!!!! SSHHHHHHHHHHH I also use it in WORK  :-))
 
DISSCLAIMER
 
BUT I WILL NOT BE HELD RESPONSABLE IF IT DAMAGES YOUR MODEL
 
I have never had a problem BUT BUT BUT there is ALLWAYS a first time.I stripped an old Minitrix Hymek model train not so long ago with it and the train came up shiningly clean.
 
TOP TIP when using it DONT let it dry out,I ALLWAYS spray on ...leave it a few mins spray again and place it in a plastic bag for an hour,spray again into plastic bag THEN wash it off with warm water,if it needs reapplying then so be it,use a tooth brush( NOT THE WIFE'S) an old one prefferably to clean intrecate parts or an OLD 1/2 paint brush with cut down bristles
 
 
Dave
Logged

BarryM

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,701
  • Location: West Lothian
Re: Fairy Power Spray Applications?
« Reply #5 on: November 08, 2012, 10:43:15 pm »

Thanks to all who have replied. I can go forward with more confidence now.
Regards,
Barry M
PS I most certainly would not use the Wife's toothbrush; my daughter has an electric one.  :-)
Logged

Norseman

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,466
  • Location: Huyton, Liverpool
Re: Fairy Power Spray Applications?
« Reply #6 on: December 16, 2012, 07:36:13 pm »

I have used it on a 1950's wooden boat. A few applications removed the surface paint with ease and no burnt skin either. Only problem I had was it would no touch  the undercoat at all. 1950 so maybe it was high lead content. Anyway I would no hesitate to use it again.

Dave
Logged

Martin (Admin)

  • Administrator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 23,359
  • Location: Peterborough, UK
    • Model Boat Mayhem
Re: Fairy Power Spray Applications?
« Reply #7 on: December 16, 2012, 08:18:05 pm »


It's also very good for de-greasing old model IC....... and real engines I guess!

 (Don't leave it on aluminium for too long and it may oxidise the surface! )
Logged
"This is my firm opinion, but what do I know?!" -  Visit the Mayhem FaceBook Groups!  &  Giant Models

Stavros

  • Guest
Re: Fairy Power Spray Applications?
« Reply #8 on: December 16, 2012, 09:30:55 pm »

Kelly says it is also good for cleaning the oven  :D O0 O0 O0 O0 {-) {-) {-) {-) {-) {-)
 
 
Dave
Logged

Martin (Admin)

  • Administrator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 23,359
  • Location: Peterborough, UK
    • Model Boat Mayhem
Re: Fairy Power Spray Applications?
« Reply #9 on: December 16, 2012, 09:38:46 pm »


..... I don't get the joke! 
Logged
"This is my firm opinion, but what do I know?!" -  Visit the Mayhem FaceBook Groups!  &  Giant Models

Norseman

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,466
  • Location: Huyton, Liverpool
Re: Fairy Power Spray Applications?
« Reply #10 on: December 16, 2012, 09:44:43 pm »

What's an oven?
Logged

Subculture

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 4,187
  • Location: North London
    • Dive-in to Model submarines
Re: Fairy Power Spray Applications?
« Reply #11 on: December 16, 2012, 09:46:34 pm »

I've used mr muscle over cleaner, and old brake fluid to strip paint, always on plastic stuff, car shells and a couple of boat hulls. Find either works fairly well in enamel finishes, but anything tougher, and I find it far less effective.
Logged
Pages: [1]   Go Up
 

Page created in 0.098 seconds with 22 queries.