Got a bit more progress today have made the spoiler thing on the transom out of aluminium bar sawn and ground with a sander and finished on the linisher and i secured it with stainless screws and superglue,i will fair it in with filler at a later date will most likely make the side ones the same way,i will be glassing over the screw heads as well, have also made up the tiller arms for the rudders out of brass the collar is turned down at one end and the arm is fitted over it and peined down and soldered i didnt want to trust soldering alone i know its a bit belt and braces but i didnt want them to break loose later,the servos will be connected by 3mm stainless wire fitted with ball links at each end.