Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Cutting my own planking  (Read 4511 times)

troutrunner

  • -----------------------
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 124
  • Nil illegitimi Carborundum
  • Location: Near Grantham, Lincolnshire
    • Web Editor
Cutting my own planking
« on: February 17, 2014, 09:48:05 am »

Hi All,

I was just wondering if it is practical and worthwhile cutting my own planking strips, I have a Burgess band saw which I have made a fence for, I'm going to give it a try anyway. Any tips would be great.

What type of wood should I use and what widths and thicknesses would I need please
Logged
Paul

Peter Fitness

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 7,376
  • Location: Wyrallah, near Lismore NSW Australia
Re: Cutting my own planking
« Reply #1 on: February 17, 2014, 10:04:03 am »

I cut my own planking from 1.5mm ply or suitable thickness pine using a Proxxon miniature table saw. The width would depend on the scale of the model you're building. As to thickness, I would suggest 1.5mm to 2mm thick, although that too would depend on the size of the boat. Planked decking, if laid on a sub-deck, needs to be no more than 1 to 1.5mm thick, as it's purely cosmetic.


Peter.
Logged

troutrunner

  • -----------------------
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 124
  • Nil illegitimi Carborundum
  • Location: Near Grantham, Lincolnshire
    • Web Editor
Re: Cutting my own planking
« Reply #2 on: February 17, 2014, 10:27:39 am »

Thanks for the reply Peter,
   it's the fishing boat Eileen that I have it in mind first, it's approx. length is 28inches and approx. 8inches wide, it doesn't seem to mention the scale on the plan and I'm not sure how to work it out.
Logged
Paul

Circlip

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 4,449
  • Location: North of Watford, South of Hadrians wall
Re: Cutting my own planking
« Reply #3 on: February 17, 2014, 12:29:42 pm »

Look for the length of a full sized similar boat and convert its length into inches, then divide this by 28 and the answer gives the scale.
 
  Regards  Ian.
Logged
You might not like what I say, but that doesn't mean I'm wrong.
 
What I said is not what you  think you heard.

Netleyned

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 9,051
  • Location: Meridian Line, Mouth of the Humber
    • cleethorpes mba
Re: Cutting my own planking
« Reply #4 on: February 17, 2014, 12:40:32 pm »

I would hazard a guess at 1/24.
That would give a full size of 56 ft
about right for that type of of fisher.

Ned
Logged
Smooth seas never made skilful sailors
Up Spirits  Stand fast the Holy Ghost.
http://www.cleethorpesmba.co.uk/

troutrunner

  • -----------------------
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 124
  • Nil illegitimi Carborundum
  • Location: Near Grantham, Lincolnshire
    • Web Editor
Re: Cutting my own planking
« Reply #5 on: February 17, 2014, 05:38:51 pm »

I think I have answered my own question on will the band saw do the job, but would still like to know more about thicknesses and types of wood for different jobs, firstly planking the hull, what's best for this job please.

Some photy's of my efforts  :-))

This is what I started with, a bit of old wardrobe, teak I think.
 

I first sized it up on my table saw, then set the blade distance from the newly made fence at approx. 1.5mm.




The result  :-))


I think a little sanding is in order.


I got 18 lengths of 34inches from the first bit and recon I will get another 16 from the other bit  :-))
Logged
Paul

Peter Fitness

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 7,376
  • Location: Wyrallah, near Lismore NSW Australia
Re: Cutting my own planking
« Reply #6 on: February 17, 2014, 11:17:39 pm »

Those planks look pretty good to me Paul. Generally, the wood available to you in the UK is different to that readily available to us here in Australia, but I would suggest that as long as it doesn't crack when bent to the shape of the hull it should be OK. I normally use planks about 2mm thick for hulls, and the models I've built are usually about 80 - 90 cm long. I also use fibreglass matting as reinforcement inside the hull, laid between the frames, to help stiffen it.


Peter.
Logged

morley bill 1

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 300
  • Model Boat Mayhem is Great!
  • Location: east yorkshire coast
Re: Cutting my own planking
« Reply #7 on: February 18, 2014, 10:35:52 am »

Lime is good for planking strait grain and bends well regards   Bill....
Logged

troutrunner

  • -----------------------
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 124
  • Nil illegitimi Carborundum
  • Location: Near Grantham, Lincolnshire
    • Web Editor
Re: Cutting my own planking
« Reply #8 on: February 18, 2014, 11:14:59 am »

Where do I get Lime wood from please Bill :-))
Logged
Paul

boatmadman

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,703
  • Location: South Cumbria
Re: Cutting my own planking
« Reply #9 on: February 18, 2014, 11:45:19 am »

Cedar is also very good for planking, long straight grain, bends well and finishes really nicely.
Logged
if at first you dont succeed.....have a beer.....

morley bill 1

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 300
  • Model Boat Mayhem is Great!
  • Location: east yorkshire coast
Re: Cutting my own planking
« Reply #10 on: February 18, 2014, 03:33:34 pm »

there used to be adverts for twigfolly im sure he did lime try model boats magazine ads   bill....
Logged

troutrunner

  • -----------------------
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 124
  • Nil illegitimi Carborundum
  • Location: Near Grantham, Lincolnshire
    • Web Editor
Re: Cutting my own planking
« Reply #12 on: February 18, 2014, 10:15:40 pm »

Thanks for the links :-))

Had another dabble at cutting some more planks today, this is a different wood, I have no idea what but it is very flexible, I twisted it a turn and a half without it even showing any sign of snapping. It's another bit of salvage from the old Shrieber wardrobe, anyone any ideas what wood it could be................

The twist  :-))


Any ideas ?
Logged
Paul
Pages: [1]   Go Up
 

Page created in 0.091 seconds with 22 queries.