I have the power panel from harbor models
http://www.harbormodels.com/site08/main_pages/power_distribution_panel.htmand it works pefectly for the most part
but for some reason i am getting minimal power off the two 6 volt rails
they are supposed to deliver 6 volt 3.5 amps which is alot more than the bow thruster requires/needs
all the other voltages work flawlessly and correctly
I have a bow thruster wired up to the 6 volt rail and neither give it power
but when I hook a external isoltaed battery to th bow thruster it functions correctly
is the unit faulty ?
is it possible for just the 6 volt section to be defective or am i doing something wrong
the bow thruster is raboesh 400 fitted to the aziz from model slipway and the speed control is a mtronicks viper marine 20
and it is wired correctlywith the red wire disconnected as i have two speed controls
any suggestions would be appreciated as i tihnk i might have to mail this back to california for replacement/repair