Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[TomHugill]

Hey folks, I've commenced work on the moonraker. Put the formers in the superstructure, however when I try to fit it there is a big gap, the superstructure bottom is pretty flat and the deck is properly mated to the hull, so not sure where the issue is. Has anyone else had this issue?

[SailorMalc]

Hi had the same issue when i built my moonraker, if i remember corectly the problem was where the two deck sections join forming a slight bump. every thing fitted flat until the superstructure and former were glued together then like yours a big gap. had to detach former and sand it down at the front so that it is sitting at a slight angle in the superstructure. did try to reduce the bump but plastic is very thin and easy to go through.
hope this helps
malc