Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Help with Matt varnish  (Read 1644 times)

DarrenCarter2

  • Inactive
  • Shipmate
  • *
  • Offline Offline
  • Posts: 3
  • Model Boat Mayhem is Great!
  • Location: Swindon/faringdon
Help with Matt varnish
« on: July 19, 2014, 10:16:44 PM »

Hi there guys I'm after some help please basically I'm getting close to finishing my puffer build I don't use enamel paint as I don't like it I find it's not as nice to paint with, I'd rather use games workshop or other brands acrylic paint dad doesn't agree but I guess it's a old school/new school thing, but I need to protect the paint and I was hoping to varnish it, games works shop don't do Matt they do a satin but that will ruin the effect I have gone for with the boat, does any one no of a brand of Matt varnish I can spray on the boat that won't effect the acrylic paint thanks in advance guys
Logged

Mankster

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 770
  • Wheelerdealer
  • Location: London, UK
    • RC Model Submarines
Re: Help with Matt varnish
« Reply #1 on: July 20, 2014, 01:14:17 AM »

I also only paint with Acrylic and use Krylon Matt Finish and Testors Dull cote.

Robert Davies

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 83
  • Location: People's Republic of Wrexham
Re: Help with Matt varnish
« Reply #2 on: July 20, 2014, 02:53:19 AM »

Used this for years:

http://www.jacksonsart.com/p1593/AV_Acrylic_Medium:_Aerosol_Acrylic_Spray_Varnish_Matt_400ml_(UK_ONLY)/product_info.html

Vallejo Matt Varnish spray, shake it well and stand the tin in a bowl of warm water before use (is what I do anyhow!).

It umm… dries matt.

:-)
Logged

petermun

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 150
  • Location: Southam, Warks
Re: Help with Matt varnish
« Reply #3 on: July 20, 2014, 05:25:22 PM »

We always use Humbrol acrylic spray matt varnish   Pete
Logged

Seaspray

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,316
  • Model Boat Mayhem is the best model boat site
  • Location: East Ayrshire Scotland
Re: Help with Matt varnish
« Reply #4 on: July 21, 2014, 10:13:51 AM »

I use Chestnut acrylic from Axminster tools. Never been let down.

http://www.axminster.co.uk/chestnut-acrylic-lacquer-spray-400ml
Logged

dreadnought72

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,865
  • Wood butcher with ten thumbs
  • Location: Airdrie, Scotland
Re: Help with Matt varnish
« Reply #5 on: July 21, 2014, 12:39:33 PM »

How much would a 400ml can cover, more or less?

Andy
Logged
Enjoying every minute sailing W9465 Mertensia

Seaspray

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,316
  • Model Boat Mayhem is the best model boat site
  • Location: East Ayrshire Scotland
Re: Help with Matt varnish
« Reply #6 on: July 21, 2014, 02:08:55 PM »

It depend how many coats you spray.

I'll spray a couple of light  coats on a model at a time and take it from there. Light coats give a quick drying time and the depth of matting you want. When I get to a reasonable matt and I know the paint is protected I am happy. It can go far if you stick to the above. When you see a wet part in the job its time to stop that area. but it will dry and matt down. Certainly the Humbrol are just as good but I went for the 400 size of can and have been happy so far. My 72 inch KG5 was sprayed in 2001 and still is got good cover.

Bottom line I've just stuck with it as it been good and goes further than the small cans. Value for money yes but the postage is a pain if you can't get to retailer stocking it.
Logged
Pages: [1]   Go Up