Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: billings banckert  (Read 2884 times)

Peter_s

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 102
  • uh oh here we go
  • Location: Flintshire/Cheshire border
billings banckert
« on: February 06, 2015, 09:07:12 pm »

Hi all,
Im thinking of buying this kit:
http://www.cornwallmodelboats.co.uk/acatalog/billing_boats_banckert.html
but ive found the same kit elsewhere but for a lot more money. like here: https://www.wonderlandmodels.com/products/billings-banckert/
I'm hoping someone with more experience will be able to shed some light on why?!

Im really looking forward to this build O0 but am going to need some help with the electrics (what motor and what extras to add! :D)

as always.. thank you for all you're help!!

pete
Logged
Now where did I put that?

Tug-Kenny RIP

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 7,625
  • Location: Newport. S Wales
Re: billings banckert
« Reply #1 on: February 06, 2015, 09:40:16 pm »



It's the same boat at different prices.   :}  Go for the cheapest and you'll have more money for electrics.

Cheers

Ken
Logged
Despite the high cost of living   .......... It remains popular

Peter_s

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 102
  • uh oh here we go
  • Location: Flintshire/Cheshire border
Re: billings banckert
« Reply #2 on: February 08, 2015, 01:38:03 pm »

Right... Boat on order, now looking towards a motor... A 900 has been suggested tho I can only seem to find a cem 900. Any good? And any recommendations for a bow thruster? Really looking forward to my box turning up!!
Logged
Now where did I put that?

jarvo

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 662
  • Etherow model boat club
  • Location: Bredbury Stockport Cheshire
Re: billings banckert
« Reply #3 on: February 08, 2015, 04:57:57 pm »

Hi Peter


If you are going to a 900 size motor, why not look at a heater blower motor, more power enormose tourqe and about the same price, posibly less if you got a scrap yard nearby.


As to a bow thruster, look on the Deans marine site for Raboesh ???? they are very good


have fun and show us the picies


Mark
Logged
Tugs are for pulling

Hellboy Paul

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 197
  • Location: Where ever I am at this moment in time
Re: billings banckert
« Reply #4 on: February 08, 2015, 05:08:42 pm »

Who on earth recommended a 900 motor in a Banckert kit??? It will sink!!! Mine has a 385 motor on a 7.2v NiMH stick pack and it looks scale like with a bit of power in reserve...


Paul.
Logged

Peter_s

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 102
  • uh oh here we go
  • Location: Flintshire/Cheshire border
Re: billings banckert
« Reply #5 on: February 08, 2015, 06:12:45 pm »

Hi Peter


If you are going to a 900 size motor, why not look at a heater blower motor, more power enormose tourqe and about the same price, posibly less if you got a scrap yard nearby.


As to a bow thruster, look on the Deans marine site for Raboesh ???? they are very good


have fun and show us the picies


Mark

Thank you for the responses! Looking at the prices on the bow thrusters it looks like they range from £30-£45 depending on size.... As the banckert is not huge Im thinking about a 14mm as that seems to be the smaller version?

Who on earth recommended a 900 motor in a Banckert kit??? It will sink!!! Mine has a 385 motor on a 7.2v NiMH stick pack and it looks scale like with a bit of power in reserve...

 but
Paul.

paul have you used a gearbox? im looking to run as bigger prop as possible on this build :D so was thinking about tourque rather than weight :embarrassed:

jury is still out on the motor!
Logged
Now where did I put that?

Hellboy Paul

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 197
  • Location: Where ever I am at this moment in time
Re: billings banckert
« Reply #6 on: February 08, 2015, 06:25:58 pm »

The motor was direct drive to a 40mm prop, motor barely got warm. If you need a bit more power this motor on 12v http://www.componentshop.co.uk/mabuchi-555-dc-motor.html this will happily drive a prop up to 55mm & I doubt if you could get a much bigger prop under that hull anyway. As I said before a 900 way too big & would have to be mounted midships so if you are planning on fitting a thruster as well you will run out of room in that hull very quickly..


Paul..
Logged

Peter_s

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 102
  • uh oh here we go
  • Location: Flintshire/Cheshire border
Re: billings banckert
« Reply #7 on: February 08, 2015, 06:59:31 pm »

I think ill wait until the box appears and go from there!! O0
Logged
Now where did I put that?
Pages: [1]   Go Up
 

Page created in 0.095 seconds with 22 queries.