Although I have made static models before (cars & trucks ) this is my first time with a boat, and I have never done anything with R/C and don't know anything about it.
So after reading a lot on here and other places I decided to have ago. I read about the Italeri Vosper, so got the kit sent out, very few model shops in Cyprus. Now as well as R/C I wanted a nice looking model and with a few mods original as possible. So to start with the rudder, most I saw had the rudder in the bottom of the hull, but I want original. So I went to S.H.G and they supplied the motors,kit type rudders etc. Having looked at the rudders I came up with the idear of modifying to what I wanted. I used the tube, and cut an arm to shape,and it was a very tight push fit over the wire and epoxy it on. Will Update this.