OK I know this is a bit boring - but here is more fun with the P96. This time it is driving the main hatches - for the side hatch and the lift and extend, the P96 were rigged up using the sequencing system. For the top hatch, they were driven off the same signal - the speeds were tweaked so they close in the right order - had to do this because if the hatches close in the wrong order they snag up on each other and don't shut. Also I cant open the hatches more than that because the guide wheels lift off and the thing snags up when they close. Possibly the inner ones should have been longer and the outer ones longer.
http://www.youtube.com/watch?v=nGth5ImQTysIt is flagging up a few problems with the layout - can't open the main hatches unless the crane has been swung out of the way and will have to be careful to avoid colliding with the hatch when swinging the crane. But it all works apart from the raise and lower on the crane hook.
Seems to be turning into a bit of show case for ACTion - so far we have got:
1* P92 (possibly another one going in)
2* P93
1* P94
4* P95
5* P96
Next stage on the electronics is to build controller using 433MHz telemetry. ON the actual build is putting in the main passenger cabin
Wom
Things will go quiet again for a bit
Wom