Technical, Techniques, Hints, and Tips > Tutorials & "How To’s" ...
Measuring Bulkheads etc?
tizdaz:
Hi guys :)
My Hull is GRP & i want to re-inforce it using wooden bulkheads, whats the easiest/best method to get the correct size/shape so they fit snug?
Same for the deck to, should i use some cardboard as a template? and is the best method for deck to lay down a piece of cardboard large enough then get the hull and place it face down onto the cardboard & then draw a line all the way around on the cardboard?
Should i make templates using cardboard or ?
Any info or tips for muchos appreciated as always :)
Thanks guys/gals :)
colin-d:
there are some handy gadgets around that will "measure profile contours" if you put that in Google you will see what I mean...
there are other ways, for example if you have a strip of roofing lead, you can force it into the Hull and it will follow the contours, making templates out of cardboard or thick paper is always a good idea .. !!
tizdaz:
cool thanks :)
those profile contours are what im looking for, just need to try find one large enough now that aint too expensive! :D
tigertiger:
Doing half profiles would mean you could use a smaller gauge for the bulkheads.
RAAArtyGunner:
--- Quote from: tigertiger on November 18, 2016, 07:31:33 am ---Doing half profiles would mean you could use a smaller guage for the bulkheads.
--- End quote ---
:-)) :-)) :-))
Navigation
[0] Message Index
[#] Next page
Go to full version