Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Springer carriers  (Read 4291 times)

red110kev

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 31
  • Model Boat Mayhem is Great!
  • Location: Nottingham
Springer carriers
« on: November 28, 2016, 11:33:24 am »

Hi chaps.
Just finished my first springer (will post pics soon), but need some ideas for carriers to transport it to the lakeside.
I've got a trolley and a couple of copper pipe carriers for my other boats but due to the odd shape of the springer, I'm looking for something different.
A Google search has not come up with much.  What contraptions do you guys use? Boxes? Cradles?
Looking forward to some interesting ideas.
Regards
Kev.
Logged

Sonar

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 190
  • Location: Between. Durham. And Southampton
Re: Springer carriers
« Reply #1 on: November 28, 2016, 12:46:34 pm »

A wooden box with straps made from webbing .
A handle either side or a shoulder strap.
Logged

CGAux26

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 655
  • Location: Deep in the heart of TEXAS (Tomball)
Re: Springer carriers
« Reply #2 on: November 28, 2016, 02:36:55 pm »

Here's mine.  Very sturdy, easy to carry.  Holds the turkey baster bilge pump, door springs, tow lines, etc. as well as the boat.  Note the thin wooden straps on the side to keep the boat from sliding out.  And I used D-shaped soft window seal for the boat to rest on.
Logged

red110kev

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 31
  • Model Boat Mayhem is Great!
  • Location: Nottingham
Re: Springer carriers
« Reply #3 on: November 28, 2016, 08:09:23 pm »

Liking this one CG.... :-))
Logged

jarvo

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 662
  • Etherow model boat club
  • Location: Bredbury Stockport Cheshire
Re: Springer carriers
« Reply #4 on: November 28, 2016, 08:47:02 pm »

Hi CG, looks great, any chance of some plans???


Mark
Logged
Tugs are for pulling

CGAux26

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 655
  • Location: Deep in the heart of TEXAS (Tomball)
Re: Springer carriers
« Reply #5 on: November 28, 2016, 11:05:46 pm »

I did not draw any plans for the carrier.  I made a pattern for the curved sides of the boat, and used the pattern to make the contact areas of the carrier.  The material is MDF, except the bottom is pegboard.  As I said before the soft material the boat rests on is a window seal from the hardware store. 


Good luck building one.
Logged
Pages: [1]   Go Up
 

Page created in 0.104 seconds with 22 queries.