Topic: Brushles motor advice required. (Read 2205 times)

Big Cheese · « **on:** December 12, 2016, 08:51:22 pm »

Hello
Would anyone know what brushless motor to put in an Apache offshore V hull around 52 inches long with a surface piercing prop for the best performance please?
Regards
BC

Stavros · « **Reply #1 on:** December 12, 2016, 10:11:41 pm »

Best one to ask on here is Martno1fan message him he will certaintly know

Dave

Big Cheese · « **Reply #2 on:** December 13, 2016, 06:42:22 am »

Thanks Dave

martno1fan · « **Reply #3 on:** April 06, 2017, 10:41:50 pm »

Two ways you can go with a big boat,a friend built one of my 58" Apaches with a twin setup using 600 size outrunners on 6s per motor and t 180 escs,she runs around 50 mph for 7-8 mins thats one battery per motor,you could use two and get more runtime.Youd be looking at £400 to buy all the gear for this setup roughly .

Second option is a BIG motor like the one im using SSS 5694 inrunner on 10 s using a high quality 240 amp swordfish pro esc.Your boats a tad smaller so a slightly smaller motor would work or you could run the same one on 6 -8 s with good results .This setup would be a little more expensive .

Big Cheese · « **Reply #4 on:** April 13, 2017, 08:34:17 am »

What kv would that motor be please?

martno1fan · « **Reply #5 on:** April 13, 2017, 11:00:59 pm »

The one i have is 1000 kv.

This boat in the video is 51" using the same motor on 6s .On 9- 10 s its too much for it he told me but on 6 or even 8 s its pretty good .

https://www.youtube.com/watch?v=JID9TLkMpRI

News:

Author Topic: Brushles motor advice required. (Read 2205 times)

Big Cheese

Brushles motor advice required.

Stavros

Re: Brushles motor advice required.

Big Cheese

Re: Brushles motor advice required.

martno1fan

Re: Brushles motor advice required.

Big Cheese

Re: Brushles motor advice required.

martno1fan

Re: Brushles motor advice required.