Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: setting up reciever  (Read 2475 times)

webbo

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 42
  • Model Boat Mayhem is Great!
  • Location: Cleethorpes UK
setting up reciever
« on: January 22, 2017, 09:54:40 pm »
Hi all
Setting up a Corona RP6D1 receiver and am using 2x15 amp viper marine esc. 1st esc into channel 1 but does it matter which other channel I plug 2nd esc into :-)
Logged

chas

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 588
  • now in los montesinos Spain.
Re: setting up reciever
« Reply #1 on: January 22, 2017, 11:00:49 pm »
No, it shouldn't matter, as long as the channel coresponds with the stick you want to use.
Logged

salmon

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 413
  • Location: Las Vegas, Nevada - USA
Re: setting up reciever
« Reply #2 on: January 23, 2017, 01:31:12 am »
And you disconnect the red cable from the second esc. You do not want both providing power to the RX through the ESC.
Logged
If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.
Pages: [1]   Go Up
« previous next »
 

Page created in 0.127 seconds with 21 queries.