I'm sure Andy will be along soon. It is probably something very simple.
Some checks to make
Are all the tx and rx batteries full charged. Ie not charged for 1 hour.
When you turn on do the rudder and elevator planes work. Also the throttle?
As it's the dive knob....can you here a pump switch on and hear it working
Post answers to all the above to start and if possible pictures.
Will also need to know what type of radio....ie futaba, hitec etc. What mhz. 27 Or 40.
Also, I take it the WTC is clear. Is there and water or condensation in it?
Hi ,
Thanks to all your replies above 😊,
Batteries as far as I am aware are fully charged, the controller was left on charge for at least 10 hours , the sub has NIMH battery fitted to which i csrried out a full cycle on ( discharge then recharge via my charger) its a 4500mah I had my charger charging at 1 amp so only slowly charged her.
The rudder, all flaps both front and rear work , as does the throttle.
When I put it into dive mode the front planes move into the correct position but I can't hear the motor running both in and out of the water.
It's a Futaba controller and I believe 40 MHz, will confirm when I get home.
I presume WTC is the water tight canister? If so that's all clear no water / condensation.
I will take some pictures when I get home.
Thanks for all your help , hopefully will get her sorted.
Cheers
Dougie