Topic: Start to make a open fishing boat damjolle (Read 5515 times)

Bernhard · « **on:** January 13, 2018, 10:22:22 pm »

Hi have start to build a open fishing boat, damjolle the have used and still use in Denmark
Start as a stand model of a Titanic lifeboat,,the same i have used to my steam boats over the years,, 85 cm long
So her it is,, will be driven by a Graupner 400,6volt motor,

Bernhard · « **Reply #1 on:** January 13, 2018, 10:26:03 pm »

Some more work don

Bernhard · « **Reply #2 on:** January 13, 2018, 10:27:41 pm »

And this,have take a friend on bord

derekwarner · « **Reply #3 on:** January 14, 2018, 12:59:08 am »

Suburb as usual Bernhard

. ....we see the brass fuel tank and bottom isolation valve.... and every other thing is understood

.

Even the skipper with his bottles of Carlsberg ........however is this a hand operated bilge lift pump with overboard discharge?

Derek

Bernhard · « **Reply #4 on:** January 14, 2018, 08:49:26 am »

Many Thanks for your kind words,,yes it is a hand pump,,and i have drill a hole in the top of the side,,to a small copper tube..
Now i have just ordred a esc sound less from Germany,,, i dont like the sound from the normal esc to the motor,,and a euronaut multi 25 cost a lot
https://www.modellbau-regler.de/shop/product_info.php?products_id=53
And i have a 1 cylinder 5hk,motor sound from mr rcwold,,
Regards
Bernhard

Neil · « **Reply #5 on:** January 14, 2018, 11:29:01 pm »

some nice looking Sole in that catch of yours Bernhard............and the boat is beautiful.................it must be lovely to work with such fine timber. are you going to varnish it or just linseed oil and wax it.

neil.

Bernhard · « **Reply #6 on:** January 15, 2018, 08:44:10 am »

Thanks.. 2 time epoxy in and out ,,and so 2 times paint ,,

roycv · « **Reply #7 on:** January 15, 2018, 08:55:03 am »

Hello Bernard, all I can say is "Wow", a great piece of realism.
I have a question for you but it is "off thread", I have just finished a Billing Mary Ann fishing boat which I would like to add more detail but cannot find any full size pictures on-line. Can you point me at any please? I am just after pictures.
best regards Roy

inertia · « **Reply #8 on:** January 15, 2018, 09:25:48 am »

Absolutely breathtaking. This is proper modelling - what's that 'messing about with bits of wood' that I've been doing for fifty years?
DM

Bernhard · « **Reply #9 on:** January 15, 2018, 09:29:30 am »

..Thanks
ROY,,,try to look here
https://www.google.dk/search?q=billing+mary+ann&rlz=1C1CHBD_daDK734DK734&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwig59iN09nYAhXBBZoKHV5hAcQQsAQIWQ&biw=1600&bih=769

This i sold Last year..
https://www.youtube.com/watch?v=-oiYyUMhhA8

<iframe width="560" height="315" src="https://www.youtube.com/embed/-oiYyUMhhA8" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

roycv · « **Reply #10 on:** January 15, 2018, 11:28:46 am »

Hi Bernard, I tried that and am at that general level, I am looking for some Danish historic boat photos of that period, circa 1950's. The only full size photo is on the kit box!
Are there any preserved 45 ton North sea fishing boats or dedicated web sites? I hope they did not get sawn up like many fishing boats did some years ago.
best regards Roy

Brian60 · « **Reply #11 on:** January 15, 2018, 01:38:05 pm »

Thats a lovely model you have there, Its reminiscent of a Scottish scaffie with no mast.

Bernhard · « **Reply #12 on:** January 15, 2018, 03:48:22 pm »

Thanks
TRy this 1000 foto of old danish fishing boat ,, fiskekuttere haaa there is still a few back,,but not that many,,

https://www.fimus.dk/fotos-af-esbjergkuttere-links/

https://photos.google.com/share/AF1QipMVax1lQ8KdZeqyON93fQNHhkkTQ8vbt-wMO8iUQ60gSayfxrzdmi6HsuttxDz8kA?key=NWpxR05aaGxmV0hlOHlmbEUwYzZjNDB2Q3BFWEJn

derekwarner · « **Reply #13 on:** January 15, 2018, 10:29:19 pm »

Hundreds Berhnard....hundreds

E710.......two vessels...same registration number?..............appears not just a docking refit & modification

roycv · « **Reply #14 on:** January 16, 2018, 12:36:07 am »

Thanks Bernard that is just what I wanted, looks like I might have to build another one now!
regards Roy

Bernhard · « **Reply #15 on:** January 16, 2018, 09:30:55 am »

ok,Nice to have something to do,,

Did light in the lamp a anchor and 2 duck

john44 · « **Reply #16 on:** January 16, 2018, 10:06:06 am »

Absolutely brilliant Bernhard, you are a real artist in model making brilliant

John

Bernhard · « **Reply #17 on:** January 16, 2018, 05:43:51 pm »

Thanks John.

Bernhard · « **Reply #18 on:** January 22, 2018, 04:29:33 pm »

https://www.youtube.com/watch?v=b459S-r8kyM&t=60s

<iframe width="560" height="315" src="https://www.youtube.com/embed/b459S-r8kyM" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Bernhard · « **Reply #19 on:** January 30, 2018, 08:02:45 pm »

Test Peristaltic Pump, and built a small gramophone that plays a 78 record??
[/size][/color]
[/size]https://www.youtube.com/watch?v=T3q0x_jPBsw

missyd · « **Reply #20 on:** April 24, 2018, 07:39:44 pm »

Superb model!

ballastanksian · « **Reply #21 on:** April 24, 2018, 09:34:01 pm »

There are so many good things to see in the photographs Bernhard!

I love the workshop. It has lots of history about the room. The model is excellent in all aspects from the detail to the weathering. It looks old and used, but not overdone to look hazardous to sail in.

Finally, the fisherman in the bow looks the most enthusiastic and determined fisherman in the world! Do you sculpt the figures or are they commercial items? They look unique to me.

Bernhard · « **Reply #22 on:** April 25, 2018, 06:40:17 am »

ohhh Manyyyy Thanks for your kind words,,i find the figure on ebay,and sometimes i do some work on them ,or just use them as they are,,this 2 i have let them be

Regards
Bernhard

ballastanksian · « **Reply #23 on:** May 03, 2018, 09:49:38 pm »

Bernhard · « **Reply #24 on:** May 04, 2018, 06:35:57 am »

https://www.youtube.com/watch?v=Lkekz250wrw&lc=z22befcimkvay3rgp04t1aokgb0a3nv4o2rl0u21oe3zrk0h00410

News:

Author Topic: Start to make a open fishing boat damjolle (Read 5515 times)

inertia