Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Mtronik 15 Speed controller  (Read 2720 times)

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Mtronik 15 Speed controller
« on: January 17, 2018, 05:06:44 pm »

what sort of connectors come on the motor wires (blue and yellow) on the mtroniks marine 15 Speed Controller ?
Which connectors do I need to buy to plug into them ?
Thanks
Logged

tizdaz

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 590
  • Boom!
  • Location: Chester
Re: Mtronik 15 Speed controller
« Reply #1 on: January 17, 2018, 05:10:28 pm »

depends which motor, most come bare (no connectors) to give you the choice
Logged
My large-scale TID Build Website: http://www.tizdaz.co.uk/forum

Facebook:
https://www.facebook.com/RCTidTug/

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Re: Mtronik 15 Speed controller
« Reply #2 on: January 17, 2018, 05:13:11 pm »

 :-))
Logged

tizdaz

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 590
  • Boom!
  • Location: Chester
Re: Mtronik 15 Speed controller
« Reply #3 on: January 17, 2018, 05:23:49 pm »

if unsure best bet is contact the shop/seller & ask them if it comes pre-wired & what connectors are used :)
Logged
My large-scale TID Build Website: http://www.tizdaz.co.uk/forum

Facebook:
https://www.facebook.com/RCTidTug/

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Re: Mtronik 15 Speed controller
« Reply #4 on: January 17, 2018, 05:28:00 pm »

 :-))
Logged

malcolmfrary

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,027
  • Location: Blackpool, Lancs, UK
Re: Mtronik 15 Speed controller
« Reply #5 on: January 17, 2018, 06:03:59 pm »

My Viper 15 came with the female half of a bullet connector on each motor wire.  Obviously, you have to source the male bit from somewhere like Maplin or Halfords.  Sensible, really, because if the motor spins the wrong way, its easy to reverse the connection.  Haven't used the brushless version, though.
Logged
"With the right tool, you can break anything" - Garfield

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Re: Mtronik 15 Speed controller
« Reply #6 on: January 17, 2018, 06:13:21 pm »

Many Thanks  :-))
Logged

timg

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 319
  • Location: east yorks
Re: Mtronik 15 Speed controller
« Reply #7 on: January 17, 2018, 08:15:58 pm »

Hi Gardener


I use the red size of male bullet crimp connections , no problems so far


https://www.maplin.co.uk/p/maplin-insulated-crimp-terminal-bullet-plug-red-jh85g


Just not from maplin ,try a local car parts shop


Spud
Logged

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Re: Mtronik 15 Speed controller
« Reply #8 on: January 17, 2018, 08:20:21 pm »

 :-))
Logged

Umi_Ryuzuki

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,395
  • Location: PDX, OR USA
    • Models and Miniatures
Re: Mtronik 15 Speed controller
« Reply #9 on: January 17, 2018, 09:53:58 pm »

If I recall correctly, the white plastic plug is often known as a Tamiya Plug at the hobby shops.

It could also be a Kyosho, but the only difference would be that the pins were reversed inside the plug proper.

RST

  • Guest
Re: Mtronik 15 Speed controller
« Reply #10 on: January 17, 2018, 10:33:20 pm »

If you google Mtronics -or just go to their website it shows bullet connectors (same as you can get from Halfords or Maplins).  Or on that ESC page it shows a set of motor leads available pre-wired for something like £1.99?

http://www.mtroniks.net/prod/RC-Accessories/WBULCON30MO.htm

World is your oyster -use whatever connector you want if you cut the wires.  Nothing wrong with chock block of suitable rating if you don't have suitable crimp pliers.

Rich
Logged

Gardener

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 181
  • Location: Runcorn
Re: Mtronik 15 Speed controller
« Reply #11 on: January 17, 2018, 10:47:53 pm »

Many Thanks  :-))
Logged
Pages: [1]   Go Up
 

Page created in 0.094 seconds with 22 queries.