Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: electronics box / distribution  (Read 2618 times)

Klunk

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 5,208
  • If you know who I am, please remind me!!
  • Location: luton, beds
electronics box / distribution
« on: February 27, 2018, 10:46:16 pm »

is there a piece if kit that will
a. have a 12v input
b. have a 12v 15amp output
c. 6v 1amp bec output
d. 9v 3amp output
e. 12v 5amp output???


why all this i hear you ask
a. is for the esc
b. seperate rx circuit
c. sound system
d. for a 12 to 24v convertor for a foggy unit
at present im running a p112 for the 2 x 12v pieces and 2 seperate circuits for the sound and bec. would also be good to have a 6v 3amp fir a lighting circuit
Logged
SECRETARY - LUTON AND DISTRICT MODEL BOAT CLUB
full time penguin

malcolmfrary

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,027
  • Location: Blackpool, Lancs, UK
Re: electronics box / distribution
« Reply #1 on: February 28, 2018, 10:03:41 am »

b) and e) are simple enough from a 12 volt supply - connect direct from the battery via appropriate fuses.
c) can be taken care of by https://hobbyking.com/en_us/hxt-ubec-5-6v-output-5-5-23v-input.html?___store=en_us
https://www.amazon.co.uk/Airplane-Ubec-Aebc617-4-5a-Input/dp/B01K9GHWHI  will do the job for d)
I doubt that anybody will do a single unit that has everything wanted in one go as it will be a very specific, restricted market.

No doubt Maplin have a box that will hold it, but you will have to be quick off the mark to catch them before they shut up shop, or they do what they have traditionally done, which is to spot a useful line and either hide it or discontinue it.
Logged
"With the right tool, you can break anything" - Garfield

bfgstew

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 502
  • Comfortably Numb
  • Location: Retford (Robin Hood Country)
Re: electronics box / distribution
« Reply #2 on: February 28, 2018, 10:25:23 am »

Give component shop a call and see if they can knock something up for you, nothing ventured, nothing gained.
Logged
"Give me a ping Vasili. One ping only, please"

Martin (Admin)

  • Administrator
  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 23,365
  • Location: Peterborough, UK
    • Model Boat Mayhem
Re: electronics box / distribution
« Reply #3 on: February 28, 2018, 10:45:40 am »

Logged
"This is my firm opinion, but what do I know?!" -  Visit the Mayhem FaceBook Groups!  &  Giant Models

mrlownotes

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 404
  • Location: A bit NorthWest Cambridgeshire
Re: electronics box / distribution
« Reply #4 on: February 28, 2018, 04:26:17 pm »

I use these to drive 6V bow thruster and 6V monster servo from 12V SLA.

https://hobbyking.com/en_us/yep-20a-hv-2-12s-sbec-w-selectable-voltage-output.html

Selectable 5V/5.5V/6V/7V/9V and you can pull 20A through them. You would need 1 each for your 6V and 9V requirement.


Logged
Bintur Ellenbach
Pages: [1]   Go Up
 

Page created in 0.103 seconds with 21 queries.