Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[Terry]

Hi all.
Thinking of building one of these, but having downloaded the parts list it all looks a bit flimsy. Hull sides 2mm thick, hull bottom 1.5mm thick. Considering the weight of ballast etc. doesn't seem very strong. Any comments please.


Cheers, Terry

[Tug-Kenny RIP]

It's a Springer Tug. (google)

I would have a go with 3mm plywood at scratch building it yourself.  There are plenty of descriptions in the springer section.

You won't weight down one of these below the waterline..

cheers

ken

[tigertiger]

If you go thicker on the hull bottom, you may have problems bending the ply to shape.

[Tug-Kenny RIP]

I'll go along with this.  Perhaps a thinner piece for bending the bottom section with a heat gun. 

[steamboat66]

i used bits from the shed for the sides and ends, 8mm sides, and 18mm ends!!!