Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1] 2   Go Down

Author Topic: Al Khubar  (Read 3837 times)

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Al Khubar
« on: March 03, 2018, 05:31:53 PM »


Hi all


About 3 years ago I purchased Model Slipways Al khubar, tug boat. I found this kit difficult and basically made a dogs dinner of it. i think the main problem is I was expecting everything to fit perfectly and I did go at it like a bull in a china shop. Subsequently this partly constructed kit got put in the attic and forgotten about, well not entirely, I have since tried to rectify my mistakes, again using the touch of a cab horse, after which, again back to the attic. Fast forward to the present and after reading T33cno Portgarth build, it's back down from the attic, this time I will be asking for help and advice from the kind folk on this forum. first question I cut the slots for the deck drainage, or should I say hacked. I need to restart this, is it possible for me to refill these holes and start again. One idea, after reading Portgarth build, he lines the inside of the hull with plasticard, would it be possible to do this and then fill the gaps with P38 or some other suitable material, thus giving me after a lot of work a blank canvas to start the process from the beginning. Can I also add I am new to Boats/Ships and do not understand a lot of the lingo that goes with maritime, so bear with me if I do not understand at times.


Thank you
Carl
Logged

warspite

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,431
Re: Al Khubar
« Reply #1 on: March 04, 2018, 09:02:00 AM »

Welcome, and the best advise can be - Patience - the old adage - mark twice, cut once is also a good one, if you are able to add a couple of photo's then those who know better would be able to advise on a way to make repairs.

Planning what you want to do is better than playing by ear, many a time I have started to do a bit on a build and spend 80% of the time thinking about how to go about doing it.

If you have pictures that will help - remember the picture size needs to be less than 300MB per picture - say 900 x 900 pixels or at least less than a 1000 pixels as a guide (save the picture to a desktop and look at its properties).
Logged
Operational - 1/72 LCMIII, 1/180 Royal Sovereign
Non Operational - 1/72 Corvette, 1/72 E-Boat, 1/72 vosper mtb
incomplete, HMS Victory, tug, cardboard castle class convert, got the new job, looking again though

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #2 on: March 04, 2018, 02:26:40 PM »


Hi


pictures as requested, as you can see I have attempted some repairs with fibreglass and filler, not very pretty. :(( :((
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #3 on: March 04, 2018, 06:01:10 PM »

Hi Carl,


I note you are in Sheffield.  I do not know where, but Balne Moor MBC will not be too
far away from you.  We are off the A19 between Doncaster and Selby.  Whilst we have
various types of scale boats in the Club we do specialise in tugs. Why don't you come along to an event of ours and see.  You can even have a go with a tug.  Bring you model along, there will be someone prepared to have a look and offer advice.  Our next event is 8th April. Andy (T33CNO) is a member, so you may get to see his Portgarth when it is finished.

Please though do not get disheartened about your ability.  This is a hobby, it's supposed to be fun.  Looking at your wash ports, they did not look too bad and a little fettling with a small file might have been all that was needed.  Don't let best be the enemy of good - I've been there, believe me!  Ask me who made three wheelhouses for an Ormesby Cross and still used the first one!
I have doubts about you P38 idea.  Andy's way of putting plasticard on the inside of the bulkheads
is a tried and tested technique but I'm not sure that P38 would shape a cleanly when you reshape the ports.
Maybe see you in April?

Michael

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #4 on: March 04, 2018, 06:40:08 PM »


Hi Michael


Will check if I am duty on the 8th, notice you have a pic of what looks like a series 1 land rover, is that another interest of yours.


Carl
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #5 on: March 05, 2018, 08:10:19 AM »

Hi Michael


Will check if I am duty on the 8th, notice you have a pic of what looks like a series 1 land rover, is that another interest of yours.


Carl


Yes, what we call "the wife's car" is a 1952 80" Series 1 Land Rover.  It looks just like my avatar and was registered in September of that year (which technically makes it a 1953 model) to Lord Howard of Glossop at his Knightsbridge address.
The Land Rover never lived there though.  It worked on his Yorkshire estate, Carlton Towers near Selby.
In 2012 it featured in a Japanese TV documentary about Royal patented products.

I also own a 1967 series 2 hybrid, but that's a whole different story.

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #6 on: March 05, 2018, 07:52:16 PM »


may be this should be on a different forum, I own a 1975 series 3, off road at moment hopefully back on by the end of the month.


Carl
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #7 on: March 06, 2018, 08:00:57 AM »

may be this should be on a different forum, I own a 1975 series 3, off road at moment hopefully back on by the end of the month.


Carl
You're right that it is not a subject for this part of the forum, but there is a section for other hobbies and interests.
I'll put some pictures of the series one there when I break her winter hibernation next month.

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #8 on: March 22, 2018, 05:34:00 PM »


Hi all


as i can't make any progress on the hull, I treated myself to a cutting mat, (should have bought one years ago), and thought I would get on with some of the deck items, I think they've turned out OK so far. Michael, I am now on duty on the 8th, I was originally on rest day and was planning to come to the event, when is the next one?, pictures of progress so far.
Logged

carlmt

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,276
  • Figurin' it out........slowly!!!
  • Location: Redditch, Worcestershire
    • Linkspan Models
Re: Al Khubar
« Reply #9 on: March 22, 2018, 05:48:29 PM »

Nowt really wrong with the washports - it is a tug after all and they get knocked about something chronic!!

And as for the deck parts - very tidy modelling from what I can see.

As has been said - take your time, be patient and work methodically.  Building model boats is not a race - it is purely for your own enjoyment!!!

Stavros

  • Guest
Re: Al Khubar
« Reply #10 on: March 22, 2018, 10:04:10 PM »

Go to the painting section and read what I have said about filler.....time and time again Ive said to everyone don't use P38 far to hard to rub down.....Use easy light Top |Stop ...I am a panel beater and know just a bit about filler !!!




Dave
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #11 on: March 23, 2018, 07:59:25 AM »

Hi Carl,
Our next event after the 8th April is 13th May. That is a scale sailing event, but should be a good opportunity to see a range of different types of model.  If you can make another weekend sooner PM me with the dates and I'll try make arrangements to meet you at the pond as an alternative.

As the other Carl has said your new work looks good :-))

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #12 on: March 23, 2018, 07:18:54 PM »


thanks all the engouraging comments,


Go to the painting section and read what I have said about filler.....time and time again Ive said to everyone don't use P38 far to hard to rub down.....Use easy light Top |Stop ...I am a panel beater and know just a bit about filler !!!




Dave


Will have a read


Hi Carl,
Our next event after the 8th April is 13th May. That is a scale sailing event, but should be a good opportunity to see a range of different types of model.  If you can make another weekend sooner PM me with the dates and I'll try make arrangements to meet you at the pond as an alternative.

As the other Carl has said your new work looks good :-))


sods law, I am in northern Spain watching the rugby finals that weekend, then straight down to southern Spain to spend 5 days on mates boat, it's tough life sometimes. I will look at some alternative dates, are we looking at just Sundays.
Logged

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #13 on: March 23, 2018, 08:17:40 PM »




sorry that should read yacht not boat, I've just been told off
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #14 on: March 24, 2018, 04:13:30 PM »



sorry that should read yacht not boat, I've just been told off


I suppose it makes a change from your father's yacht.  Lucky for some!

General Club access to the pond is Wednesday, Saturday or Sunday, so by mutual agreement it can be any of those.  Chances are on the day it will be we two!  With sufficient warning I can make most days.

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #15 on: March 26, 2018, 08:49:06 PM »


Hi Michael


due to shift patterns, the next day I could make would be the 21st April.


cheers
Carl
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #16 on: March 28, 2018, 04:42:14 PM »

Hi Carl,

Yes, 21 April is possible for me. 

I could meet you at the pond at about 11.00 if that's OK?

Have to walk two German Pointers first!  Directions to the pond are on the website - link below.

Michael.

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #17 on: April 01, 2018, 09:11:53 PM »


Hi Carl,

Yes, 21 April is possible for me. 

I could meet you at the pond at about 11.00 if that's OK?

Have to walk two German Pointers first!  Directions to the pond are on the website - link below.

Michael.

Hi Michael

that sounds like a plan to me, I will be touch closer to the date if that's OK.


I've been doing a little bit more recently, bit of touching up still to be done, but I 'am pleased with the results, not exact copy's, see what you all think.

Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #18 on: April 03, 2018, 11:00:16 AM »

Looks like good work to me Carl, well done :-))


I'll await your confirmation on the 21st.

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #19 on: April 15, 2018, 02:16:37 PM »


Hi Michael


I've sent you a PM.


Carl
Logged

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #20 on: April 26, 2018, 08:24:16 PM »


Hi all


visited Balne MBC today, where I was greeted by Michael and his wife, thanks for your time Michael and the advice you gave, all taken on board and I will be back for more, unfortunately I won't be able to attend the meeting on the 10th June, i am on duty, sat and sun nights, that week end, I will look at the calendar of events and see which I can attend.


Carl



Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #21 on: April 27, 2018, 02:47:22 PM »

Hi Carl,

No problem, just shout out if you run into any  more obstacles.

Hoping you can get to one of the BMMBC events later in the year :-))

neverupright

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 35
  • Model Boat Mayhem is Great!
  • Location: sheffield
Re: Al Khubar
« Reply #22 on: June 10, 2018, 02:16:04 PM »


Hi all


been a while since I did any work on my tug, had a week away and since then seem to have been at work constantly, just a couple if pics, doing s a dry run before glueing
Logged

TugCowboy

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 870
  • Location: Hastings
Re: Al Khubar
« Reply #23 on: June 10, 2018, 04:48:01 PM »

Progress is progress! The Al Khubar is a great model, I had one a few years ago and it's an enjoyable build and even better on the water. Looking forward to seeing more.

Alex
 
Logged

Butts

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 289
  • Secretary, Balne Moor Model Boat Club
  • Location: Pontefract, West Yorkshire
    • http://balne-moor-model-boat-club.myfreesites.net/
Re: Al Khubar
« Reply #24 on: June 10, 2018, 06:12:42 PM »

Hi Carl,

As said above, it's good to see you making progress.

I'll look forward to seeing you stretching it's legs at Balne Moor at some point in the future :-))



Pages: [1] 2   Go Up