Another newbie question - So bought a 'High Current RC Li-po Battery On/Off Switch Connector XT60 Plug' off Amazon (but identical products available everywhere ebay, hobbyking, bangood, etc ....). Anyway turns out to be useless!
I suspect it really is a current problem as it works OK at first but tends to cut out when applying full throttle (D2822/14 Brushless Outrunner 1450kv via HobbyKing 30A ESC 3A UBEC).
So what do other folks do?
(- my thoughts are low amp switch operating a high current 80amp relay).
Gary