Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Speedline Tamar Lester 1/12  (Read 1078 times)

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Speedline Tamar Lester 1/12
« on: October 11, 2018, 06:25:50 PM »

Speedline Tamar Lester 1/12

now I'm a proud owner of the kit in 1/12 ..
au man is the big .. lol ..
I'm really looking forward to building that .. !!!!!!!!

It will still take some time until I am in the cellar of the new apartment electricity and light but until then I am diligently gathering information and worrying about how I can later realize my wishes in the reality .. it should then in my model like that much like me is possible to move and work as well as the big model ..

as soon as it starts I will share my progress with you here ..

I hope that it works with the pictures ..

Holger
Logged

Rottweiler

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 2,182
  • Location: Carharrack Cornwall
Re: Speedline Tamar Lester 1/12
« Reply #1 on: October 11, 2018, 10:06:46 PM »

If you think that is big,you had better not buy a Severn model or a Clyde model in the same scale lol👍👍
Mick F
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #2 on: October 12, 2018, 05:28:17 AM »

Hoi Mick ..

I was only surprised by the size .. Although I have used a ruler when ordering .. but he does not show the true dimensions .. lol ..

but now I'm happy about it ..

my first work will be the grinding of the hull .. from the bow tip extends over the keel to the heel seams .. below the tailgate are also seams and at the transition from the hull to the deck are almost all around smaller dents and corners ..

they have to get away so that the hull is perfect too ..

the actual work with the keels begins ..

Holger
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #3 on: October 13, 2018, 05:58:53 PM »

drive search ..

by Adrian and some others, the emax 4030 is recommended .. but after intense search, I find him not .. he will probably no longer manufactured ..
by a note from Taranis I came across the Turnigy Aerodrive SK3 - 4250-410KV ..

and that will probably be my drive setup ..


https://hobbyking.com/en_us/turnigy-aerodrive-sk3-4250-410kv-brushless-outrunner-motor.html

https://hobbyking.com/de_de/hobbyking-90a-boat-esc-4a-sbec.html

https://hobbyking.com/de_de/turnigy-battery-5000mah-5s-25c-lipo-pack-xt-90.html


what do you think .. ??


Logged

kinmel

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 596
  • Colwyn Bay M.B.C.
  • Location: Conwy, in sunny north Wales
Re: Speedline Tamar Lester 1/12
« Reply #4 on: October 13, 2018, 07:18:35 PM »

I recommend you buy a programming card as well .....  https://hobbyking.com/de_de/hobbyking-boat-esc-programming-card.html
My Tamar never needed higher than 25 amp fuses with similar motors.
Many are using the same motors with the Speedline Shannon and have found the Turnigy ESCs to be a better product.... 

https://hobbyking.com/de_de/catalogsearch/result/?cat=&q=+9261000054-0 ( 50 amp )  or https://hobbyking.com/de_de/catalogsearch/result/?cat=&q=9261000056-0  ( 90 amp )

plus the card to match...  https://hobbyking.com/de_de/catalogsearch/result/?cat=&q=9261000059-0
Logged

Taranis

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 196
  • Model Boat Mayhem is Great!
  • Location: Yorkshire
    • Shannon builders group
Re: Speedline Tamar Lester 1/12
« Reply #5 on: October 13, 2018, 07:30:00 PM »

I agree with Alan and I use the 50amp Turnigy marine ESC too. Despite numerous thrashings they won't take out a 25 amp fuse  :-))  I no longer fit fuses and rely on the ESC to protect itself.


They are on the lower equipment shelf with servos and pumps.


A different boat yes and we use 1185kv 35-42 which may not be suitable for the Tamar so I would stick to the tried and tested.






An out of date picture without upper shelf and fuses now scrapped
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #6 on: October 13, 2018, 07:45:49 PM »

Sorry .. the programming card I had forgotten to write with ..

the regulator the Kinmel .. - he is called Alan .. ?? - I think it's fitting ..  :-)) :-))


and thanks for the pictures

Holger
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #7 on: November 27, 2018, 05:39:13 PM »

After a long break, I now report back .. Meanwhile, the heart of Tamar has arrived and I have started to drill the rudder blades .. and although I have bored very slowly is partially way the half millimeter from the edge melted as I think .. but if I embed the 4 mm stainless steel rod, the holes are filled again .. after grinding the rudder shape and painting it will be nothing to see ..
Logged

Neil

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,470
  • Location: near Fleetwood
Re: Speedline Tamar Lester 1/12
« Reply #8 on: November 27, 2018, 06:20:40 PM »





After a long break, I now report back .. Meanwhile, the heart of Tamar has arrived and I have started to drill the rudder blades .. and although I have bored very slowly is partially way the half millimeter from the edge melted as I think .. but if I embed the 4 mm stainless steel rod, the holes are filled again .. after grinding the rudder shape and painting it will be nothing to see ..





Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #9 on: November 28, 2018, 02:47:32 PM »

yes Neil .. so it should actually be read .. I hope it works now synonymous with the images to ..
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #10 on: November 30, 2018, 05:56:10 PM »

the last two parts .. the covers of the water inlets - are now there .. I would like to use them to cool over a small pump, the two controllers .. now I have everything then in winter to finish everything so that the Tamar in the spring the first time into the water can ..
Logged

Taranis

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 196
  • Model Boat Mayhem is Great!
  • Location: Yorkshire
    • Shannon builders group
Re: Speedline Tamar Lester 1/12
« Reply #11 on: November 30, 2018, 06:45:58 PM »

Very realistic  :-)) 
Logged

gingyer

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,467
  • Location: Glasgow
Re: Speedline Tamar Lester 1/12
« Reply #12 on: November 30, 2018, 08:56:40 PM »

the last two parts .. the covers of the water inlets - are now there .. I would like to use them to cool over a small pump, the two controllers .. now I have everything then in winter to finish everything so that the Tamar in the spring the first time into the water can ..


Where did you get those covers from??
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #13 on: December 01, 2018, 11:35:58 AM »

Hoi Ginger

I let them have 3D print from the company ..

https://www.3dnetzwerk.com/zeitdruck/

but surely there is someone near you who can print them for you .. I have a drawing with the measurements from the article here by OVL - TAMAR Speedline 1/12 - made page 2 and sent to the company ..

greetings Holger
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #14 on: December 01, 2018, 11:41:22 AM »

Very realistic  :-)) 




yes Taranis ..

they look great .. I am now only on the superior if I leave them in color as the color is already very close to the original color approach ..
Logged

gingyer

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,467
  • Location: Glasgow
Re: Speedline Tamar Lester 1/12
« Reply #15 on: December 01, 2018, 01:14:17 PM »

Thanks for that information
Logged

furball

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 232
  • Location: Herne Bay, Kent
Re: Speedline Tamar Lester 1/12
« Reply #16 on: December 02, 2018, 05:39:35 PM »

Did you get an STL file from the 3D printing company, or did you send them one?


Cheers


Lance
Logged

Holger

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem is Great!
  • Location: Riesa
Re: Speedline Tamar Lester 1/12
« Reply #17 on: December 03, 2018, 07:39:07 AM »

Neither Lance nor .. I have sent him a drawing with the measurements .. he then gave me a picture of the model if it is ok for me or if I may have change requests .. he has then changed something .. me again then sent a picture again and I then gave my ok to print .. but you will surely find someone near you or on the island .. from here, too, the shipping would be very expensive ..

Holger
Logged

howardspary

  • Shipmate
  • *
  • Offline Offline
  • Posts: 7
  • Model Boat Mayhem is Great!
  • Location: mildenhall
Re: Speedline Tamar Lester 1/12
« Reply #18 on: December 08, 2018, 03:04:18 PM »

hi all again
are the bolts supplied by speedline on the 1/12 scale  tamar 14ba or 12ba with head one size smaller,have had reply from member in cornwall has some spare from his trent build may contact him as the size seems difficult to obtain



thanks for members help

howard spary#
scuppers


Logged

kinmel

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 596
  • Colwyn Bay M.B.C.
  • Location: Conwy, in sunny north Wales
Re: Speedline Tamar Lester 1/12
« Reply #19 on: December 09, 2018, 06:12:18 AM »

they are  12BA Steel Hex Head Bolts (one size smaller head)  and are usually in stock at ... 

https://www.chronos.ltd.uk/acatalog/Steel_Hex_Head__one_size_smaller__BA_Bolts.html    -  Scroll down the page for 12BA
Logged
Pages: [1]   Go Up