Mess Deck: General Section > Beginners start here...!
Brass rudder swg advice please
trelawney:
Model launch 30 inches long with a rudder approx 45mm by 45mm.
No thickness given on drawing
I have some 18swg brass sheet which is 1.219mm, but it looks a tad thick to me.
Would appreciate members advice as to which gauge would be suitable
Thank you
Trelawney
grendel:
i think I used about 0.8mm when I did mine
Netleyned:
Use what you have.
The extra thickness
will give a bit of rigidity.
Ned
Martin (Admin):
Especially if your 'ground' the boat!
trelawney:
Thanks for the advice
Trelawney
Navigation
[0] Message Index
[#] Next page
Go to full version