Topic: Andy’s, nothing like a Stevn's arctic build! (Read 116633 times)

Taranis · « **Reply #325 on:** November 13, 2020, 06:47:34 pm »

If it saves me buying another battery I use what I have. When I bought the regulator I envisaged coming off the main batteries but things evolve along the way.
As for why the regulator? I thought a regulated 7.4 constant was a better alternative to a fully charged 2s Lipo at 8.4 volts that will ultimately run down to well below 7.4

If it fails on a sail day I still have 2x 6volt BEC wires on the ESC's to keep going, quite easy to put the pin back in

Taranis · « **Reply #326 on:** November 13, 2020, 07:25:05 pm »

Perhaps in the fullness of time post COVID I may get to see how long Tuggy will run non stop. If that proves to be a positive I'll likely remove both LiPo and rely solely on 40ah of lead but who knows

I do know that Portgarth will run for an hour non stop at near full speed with 14ah and brushed motors. Tuggy is much bigger much heavier (more than times 2. 33lb v 75lb)but superb props that draw little current at fair speed, I expect 3hrs of average sailing with brushless being far more efficient but we'll have to wait and see

Taranis · « **Reply #327 on:** November 13, 2020, 11:12:53 pm »

Driven by Friday night TV I'm bored enough to cut out the openings for the XT60 panel mount plugs.

Price of these is crazy. This UK seller is £2.99 for ONE or £5.99 for FIVE

https://www.ebay.co.uk/itm/Amass-XT60E-M-Surface-Mounted-Male-Connector-XT60/313020628842?ssPageName=STRK%3AMEBIDX%3AIT&var=611712947231&_trksid=p2057872.m2749.l2649

Anyway in the absence of their arrival I've calculated the fixings in preparation.

16-21 · « **Reply #328 on:** November 15, 2020, 01:09:32 pm »

Andy,

Out of interest the results you posted a video of
21ah is that one motor?
Will you be running the sla’s in parallel?

Taranis · « **Reply #329 on:** November 15, 2020, 07:06:37 pm »

Seems reply alerts have stopped ?

Hi yes 21 was one motor. No need for parallel was one battery to each ESC

16-21 · « **Reply #330 on:** November 19, 2020, 11:59:01 pm »

Andy,

I would of thought it best to run in parallel.
Entirely up to yourself of course.
I’ve been speaking to Oceanworks and they are apparently working on a
Proportional
360 degree servo
30kg torque
6v unit
Full metal

Taranis · « **Reply #331 on:** November 20, 2020, 07:31:35 am »

They're always working on something

Still not getting forum email alerts since server change.

If you want to keep up with the build see The Model Tug Group on facebook

SailorGreg · « **Reply #332 on:** November 20, 2020, 10:26:00 am »

Quote from: Taranis on November 20, 2020, 07:31:35 am

If you want to keep up with the build see The Model Tug Group on facebook

Does that mean you won't be posting the build here any more?

Greg

Stumps · « **Reply #333 on:** November 20, 2020, 11:52:10 am »

Hi Andy,

From a really selfish point of view, please continue to post updates here as I only use facebook on my phone. Don't ask... but you don't get the photo resolution on a phone...

I have been following the build on FB and it's a monster job and a master class in tug building.

regards
Ant

Taranis · « **Reply #334 on:** November 20, 2020, 02:44:39 pm »

Sorry Greg for the foreseeable future yes.

Sorry Ant but if you have facebook you are half way there.
Anyone who wants to see pictures at any size you choose, just bookmark the gallery! All the originals are posted there.
https://techno.smugmug.com/Stevns-Arctic/i-zn7mzxV

Forum email alerts still not working.

Edit thank you all.

SailorGreg · « **Reply #335 on:** November 20, 2020, 11:09:32 pm »

Was it something we said?

Taranis · « **Reply #336 on:** November 20, 2020, 11:15:52 pm »

Nothing to do with watchers or participants. I don't really want to open a can of worms.
As an aside topic alerts are still not working.

RST · « **Reply #337 on:** November 27, 2020, 10:38:22 pm »

Very sad to see no more updates on this. I was enjoying watching your process. Hopefully you won't revert to just Facebook.

Taranis · « **Reply #338 on:** November 27, 2020, 10:47:38 pm »

Hi Rich
Today all posting was halted by a facebook BAN. A simple post of a photo from my smug mug gallery triggered world war III
Somehow their Robotic moderation decided it was narcotic related and against community standards.
I objected to this via their yes/no interrogation system and this went on to a review where they concluded the post was innocent

no sh1t sherlock
However despite being cleared of wrong doing they (real people) never thought to unblock me

Posting other than today's experience has been excellent. I can start a post in the morning and add photos to it all day long as I progress. There is absolutely no editing time limit on an Authors posts so this is much more convenient and the feedback is incredible as the group is tug specific. I hope you'll give it a try.

EDIT still not getting topic reply notifications.

The build is probably close to 200 photos further down the river now

RST · « **Reply #339 on:** November 27, 2020, 11:06:24 pm »

Hi Andy, thanks for the reply. I don't get notifications anymore by the way either! I just know to check a few threads of interest.

Looks like you are set on Facebook now -somethimg many of us don't use, hence why we join forums. Nothing tempts me to it at all if it's a secret group.

Good luck with your build, I can only hope you put back on here. You don't have to post every step (I don't post build blogs on any forums now), but it's important to keep forums going when we have interesting things to show.

Rich

Taranis · « **Reply #340 on:** November 27, 2020, 11:13:51 pm »

Thank you.
Perhaps if the new Captain of the ship reconsiders editing time limits rather than patronising me about how to blog? I've put four years of effort into supporting Mayhem I feel a little let down.

EDIT
A while ago

Taranis · « **Reply #341 on:** November 30, 2020, 06:21:17 pm »

Don't forget Rich! the photo gallery is updated frequently without visiting Facebook

https://techno.smugmug.com/Stevns-Arctic/i-qTMSKfJ

towrope · « **Reply #342 on:** December 01, 2020, 02:02:22 pm »

Hi Andy do hope your problems are resolved soon along with many others miss not only the photos but the write ups on the build very interesting reading. I used to follow Brian's build with the same interest and that is what draws me to this forum keep up the good work and all the best Towrope.

Taranis · « **Reply #343 on:** December 01, 2020, 03:21:51 pm »

Hi
I posted in so many places recently that I had to settle on where was easiest and the most interactive.
On Facebook I can start a post in the morning and edit all day long to add pictures as I progress meaning I’m not sitting down using up lots of time composing one post.
30 minute editing time is just no longer satisfactory fo me.
The best place to share tugs is in a tug group where the interest is greatest.
If there is ever a change I will resume
Cheers

Edit
The model tug group is moderated by the Boyd bro’s two of the best tug builders

Topic reply notifications have stopped again

Taranis · « **Reply #344 on:** December 02, 2020, 09:15:10 pm »

All in a days work. As suggested by Rich RST a picture a day.
See the photo gallery for full picture set

chum444 · « **Reply #345 on:** December 03, 2020, 02:48:06 am »

Excellent Andy!

davejo90 · « **Reply #346 on:** December 03, 2020, 09:21:21 am »

It's looking great Andy

Taranis · « **Reply #347 on:** December 03, 2020, 04:44:36 pm »

Thanks Bill & Dave
Gallery is updated today

Taranis · « **Reply #348 on:** December 04, 2020, 09:09:31 pm »

Envisioned crane controls

tugboyben · « **Reply #349 on:** December 04, 2020, 09:31:59 pm »

Evening Andy

Super job keep photos coming

Jason

News:

Author Topic: Andy’s, nothing like a Stevn's arctic build! (Read 116633 times)

RST

RST

davejo90