Topic: Chris' HMS TIGER (C20) - 1:72 SCALE (Read 385308 times)

Taranis · « **Reply #25 on:** June 07, 2019, 07:21:51 pm »

Quote from: frogman3 on June 07, 2019, 07:20:32 pm

AN LAST ONE for today I have now started to cover her in what I call a ply rap round this is as far as I have got on the build
https://ibb.co/ThqhP46
more links or pics when I get that far
chris

frogman3 · « **Reply #26 on:** June 07, 2019, 07:27:47 pm »

Many thanks Andy as I treid to do as you said on imgbb an it all went haywire an I could not get back on the imgbb site bloomin windows 10 I found windows vista far easyier but thank you for bringing the pics up im very pleased only wish I could do it but at least the pics getting on the site as I have great plans for quite a few workin features on tiger an hope all the guys will enjoy it all best chris

Rob47 · « **Reply #27 on:** June 07, 2019, 09:34:38 pm »

That's just how I built the original Tiger, Hermes and Phoebe, Victorious done same way but plastic card instead of the sheet ply.
My Tiger has traversing 6" that's squirts water, bridge lights, nav lights, mast light, gyro controlled stabilisers, flood lights, rotating radar and white/red battle lights and a really loud foghorn

Bob

frogman3 · « **Reply #28 on:** June 08, 2019, 10:39:17 am »

HI Bob yes that's what im planning to do the same on my tiger as you did an I did on my uss Nimitz in 1/144 an hms Edinburgh in 1/64 hms York in 1/64 an hms Norfolk in 1/72 scale some don't like to see all whistles an bell's on a model but hey that's what the real ship has

. So the models are more realistic an have you got anymore pics to show of your tiger close up to see the detail ? as I would like to see to help me in my build as I had a close friend who dieded of cancer an he said to me you never can have enough pics for info to build an I found he was right
all best chris ps are all those builds that you have done on this site ?

Rob47 · « **Reply #29 on:** June 08, 2019, 11:11:20 am »

only builds on here in detail are CVA-01 Queen Elizabeth, Victorious and Tiger

Bob

madrob · « **Reply #30 on:** June 08, 2019, 02:08:47 pm »

cant wait to see it come on Chris, if its anywhere near as good as the rest of your builds it will be outstanding

frogman3 · « **Reply #31 on:** June 08, 2019, 05:17:55 pm »

Quote from: madrob on June 08, 2019, 02:08:47 pm

cant wait to see it come on Chris, if its anywhere near as good as the rest of your builds it will be outstanding

HI Rob nice to see you on here an many thanks for the compliments very nice of you an yes I will try an make tiger outstanding as Nimitz was an all the others builds an have you made up your mind what build you want to do yet ?
chris

ballastanksian · « **Reply #32 on:** June 09, 2019, 11:50:27 am »

I love seeing plank/sheet on frame models being built, there is something very sculptural about them. I like the technique for giving you room for the saw blade to cut the hull

It inspires me to get on with my models

frogman3 · « **Reply #33 on:** June 09, 2019, 12:34:03 pm »

Quote from: ballastanksian on June 09, 2019, 11:50:27 am

I love seeing plank/sheet on frame models being built, there is something very sculptural about them. I like the technique for giving you room for the saw blade to cut the hull It inspires me to get on with my models

HI glad you like the build an yes building the scratchbuilt hull is sort of like sculpter I suppose when you think about it an yes the idea for savin a space betwteen the hull / joint has worked very well for me over the yrs always been a success an with the ship in two halvles ite easy to transport to the model show or pond have you any builds ? as be nice to see them ?
chris

frogman3 · « **Reply #34 on:** June 12, 2019, 04:59:36 pm »

HI Guys well ive started to cover the hull an by gum really awkward work but im getting there
https://ibb.co/xhHJ0Rf

Taranis · « **Reply #35 on:** June 12, 2019, 05:00:58 pm »

Quote from: frogman3 on June 12, 2019, 04:59:36 pm

HI Guys well ive started to cover the hull an by gum really awkward work but im getting there
https://ibb.co/xhHJ0Rf

frogman3 · « **Reply #36 on:** June 12, 2019, 05:03:22 pm »

https://ibb.co/H2zfmmT

frogman3 · « **Reply #37 on:** June 12, 2019, 05:07:34 pm »

https://ibb.co/KKnc6Cq

frogman3 · « **Reply #38 on:** June 12, 2019, 05:10:56 pm »

hit the link as here im covering the hull joint an got to be carefull I don't get glue in the H/J or I wont be able to part them
https://ibb.co/58PG5Ys

Taranis · « **Reply #39 on:** June 12, 2019, 06:04:46 pm »

Quote from: frogman3 on June 12, 2019, 05:03:22 pm

https://ibb.co/H2zfmmT

Taranis · « **Reply #40 on:** June 12, 2019, 06:05:16 pm »

Quote from: frogman3 on June 12, 2019, 05:07:34 pm

https://ibb.co/KKnc6Cq

Taranis · « **Reply #41 on:** June 12, 2019, 06:05:43 pm »

Quote from: frogman3 on June 12, 2019, 05:10:56 pm

hit the link as here im covering the hull joint an got to be carefull I don't get glue in the H/J or I wont be able to part them
https://ibb.co/58PG5Ys

ballastanksian · « **Reply #42 on:** June 14, 2019, 10:41:47 am »

Hm, that could be a ghastly problem to solve

frogman3 · « **Reply #43 on:** June 14, 2019, 05:46:49 pm »

Quote from: ballastanksian on June 14, 2019, 10:41:47 am

Hm, that could be a ghastly problem to solve

YES it could but got to look on the positive side I will know in a wk or so as im nearly fininshed covering the hull so fingers crossed
chris

RST · « **Reply #44 on:** June 14, 2019, 09:15:31 pm »

I protect things I don't want to stick with cheap brown parcel tape and peel it off after. Tried and tested, nowt sticks to it. Works for building boards also.

frogman3 · « **Reply #45 on:** June 17, 2019, 07:39:05 pm »

Quote from: RST on June 14, 2019, 09:15:31 pm

I protect things I don't want to stick with cheap brown parcel tape and peel it off after. Tried and tested, nowt sticks to it. Works for building boards also.

Hi thanks for the tip

frogman3 · « **Reply #46 on:** June 17, 2019, 07:47:56 pm »

Hi all well I fianally managed to cover all the hull an now leavein it for 24hhrs for glue to go off then tomorrow I will unscrew the hull an gently lift it off the
build board an then remove the hull joint bolts an the plasticard spacer an sweat buckets cutting the hull any way some pics
https://ibb.co/vB4HjTj

frogman3 · « **Reply #47 on:** June 17, 2019, 07:51:05 pm »

https://ibb.co/q1pS9rQ

Taranis · « **Reply #48 on:** June 17, 2019, 07:51:30 pm »

Quote from: frogman3 on June 17, 2019, 07:47:56 pm

Hi all well I fianally managed to cover all the hull an now leavein it for 24hhrs for glue to go off then tomorrow I will unscrew the hull an gently lift it off the
build board an then remove the hull joint bolts an the plasticard spacer an sweat buckets cutting the hull any way some pics
https://ibb.co/vB4HjTj

Taranis · « **Reply #49 on:** June 17, 2019, 07:52:23 pm »

Quote from: frogman3 on June 17, 2019, 07:51:05 pm

https://ibb.co/q1pS9rQ

News:

Author Topic: Chris' HMS TIGER (C20) - 1:72 SCALE (Read 385308 times)

RST