Stage 68 front top section decals 60, 63. 70 to fit and then plastic covers N 164, 165, 166 inserted using Revell's Clear Contact. I didn't fit windows N 162, 163 as I said earlier there fitted last.
Picture 2 The decals fitted good on the front section.
Stage 71 rear top section decal 49 on rear window stating emergency exit. Decals 62, 64 route and destination information. Pots of trouble with the decals as they needed to be trimmed to size. Plastic covers N 187- 189 fitted. N 190 fitted end of build, can't remember what decal 25 was. Holes to be drilled for advertising board edging seen earlier in build.
Picture 4, 5, 6. These decals did not fit well and lost some.Trimmed them to fit and painted the decal area black as the decal would have red showing where parts were ruined. Waited till decal dried then trimmed it.
Picture 7 once the cover was on this area look alright.
Picture 8 all windows fitted and decals but left out lower window on rear lower section. I did fit the front top windows later I had to remove them. I good thing I used clear contact rather than super as they eased out undamaged. I cleaned the glue off with Meths. Scrapped the glue off the window insert and touched it up with a brush. To me the decals were very thin hence the damage and loss. I have ordered a complete set of decal from Revell, expected to take 30 days to arrive.