Over the last few days I’ve also attempted to make a fittings kit for the Phalanx, this is what I’ve done to date.
The radar dome is made from 10mm plastic tube filled with good old Isopon, then this was machined down to a 9mm OD and rounded off the dome head.
Next was to make the sides, I did think about making the base and sides all in one peace. But decided too make the side first the make the base plate, these were made up to one base unit that could be cast in one.
The area below the radar dome is were the Gatling gun working are. This was made in four parts.
I still need the make the Gatling gun and the Amon feed rails and the base plate jacking mounts.