Topic: Breaking Motor Prop Rules - 12in Model, 385 with 60mm Prop on 1.3A 6v SLA!!! (Read 5632 times)

RST · « **Reply #25 on:** August 12, 2019, 10:03:09 pm »

...It's a cpl of inches shorter at 300mm I think. The WL is about 3-5mm below the blue paint line at the stern and about 10-15 on the blue paint line at the bow at the most. Not much way to keep water out from inside. It's a bit heavy -3D printing is cheap but the hull is a bit too heavy for the size. Nevermind, my first attempt!

Rich

News:

Author Topic: Breaking Motor Prop Rules - 12in Model, 385 with 60mm Prop on 1.3A 6v SLA!!! (Read 5632 times)

RST

Re: Breaking Motor Prop Rules - 12in Model, 385 with 60mm Prop on 1.3A 6v SLA!!!