Model Boat Mayhem - Forum

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Imara parts ID  (Read 306 times)

neptune

  • Shipmate
  • *
  • Offline Offline
  • Posts: 20
  • Location: South Australia
Imara parts ID
« on: August 29, 2019, 04:22:39 AM »

I am building Caldercrafts Imara and need help to identify a couple of parts, any help would be appreciated,
  best regards John,
Logged

neptune

  • Shipmate
  • *
  • Offline Offline
  • Posts: 20
  • Location: South Australia
Re: Imara parts ID
« Reply #1 on: August 29, 2019, 04:26:14 AM »

Second photo
Logged

neptune

  • Shipmate
  • *
  • Offline Offline
  • Posts: 20
  • Location: South Australia
Re: Imara parts ID
« Reply #2 on: August 29, 2019, 04:30:06 AM »

This is the current state of the build,
Logged

john44

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,388
  • member of the Potteries Model boat club
Re: Imara parts ID
« Reply #3 on: August 29, 2019, 09:46:04 AM »

Hi John, first picture, the tube goes onto the funnel at the front secured by the protruding
Leg, leg at the bottom fits under the ladder gantry center of the funnel.


Second picture, the mast cap in the center of the pic. Is glued to the top of the mast.


The other parts I haven't found yet


Hope this helps
John
Logged

john44

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,388
  • member of the Potteries Model boat club
Re: Imara parts ID
« Reply #4 on: August 29, 2019, 12:26:16 PM »

Hi John, have you checked out the brilliant build log being done by tafelspitz on the Imari.
You will get a lot of info. From there.


John
Logged

neptune

  • Shipmate
  • *
  • Offline Offline
  • Posts: 20
  • Location: South Australia
Re: Imara parts ID
« Reply #5 on: August 29, 2019, 04:08:55 PM »

Thanks for the quick replies John, I will have another look at the plans, yes I have been looking at that build, lots of info, thanks once again for the help,
  best regards john,
Logged
Pages: [1]   Go Up