Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length.

[Ryanb]

Is anyone aware of anyone taking over speedline?


I have somehow managed to misplace an entire stainless steel sheet J from the 1 /16 Severn.


I have called Speedline to be told its closed and that's it.

[Ryanb]

This is the sheet

[tigertiger]

In this thread here https://www.modelboatmayhem.co.uk/forum/index.php/topic,63603.msg673832.html#msg673832 Speedline has said that he will help people with existing models with spares if he can.
Flundle at Speedline is still a member on here, if calling does not work, then you could try reaching out with a PM.

[john44]

I already tried that for stanchions for my 1/12 Trent. No reply


John

[Flundle (Speedline Models)]

Ryan.
I have your sheet J here, awaiting your address! I have emailed you. try phoning 01455 637658 early evening.




and, everybody, I have a lot of 1/12th and 1/16th stanchions which I would like to sell so give me a call, same number.
Adrian

[Flundle (Speedline Models)]

It is possible that Speedline may still be taken over but that is subject to further negotiations. If it happens I will let you know through these pages.


I still have most of the makings of a 1/12th Severn so I will put a kit together if anyone should want one. It will be the very last kit from Speedline, £1,000.


All the best
Adrian

[Ryanb]

Adrian, thank you..


I am on holiday at present but I will try give you a call at some point.


Thank you again, Ryan

[Sharp]

Hi y'all
I've just joined MBM and busy reading all the correspondence going on in these pages
I've just bought the bare bones of a Speedline Shannon, hull' deck and superstructure and following the build by CC which by the way is awesome!
I realize this post is over 12 months old but  Adrian are there any stanchions for  a 1/12 scale Shannon
So I'ii becoming back to this forum, I  think, in the next few months
Stay safe
Keith

[warspite]

So to make this clear 


The bolt size is around M0.8 with an across the flats dimension of around 1.4 at 1/12th scale - i.e. M10 x 17mm across the flats, at this scale 1.5 or 1.3mm across the flats is neither here or there, whereas scale bolts from a scale manufacturer will be as close as possible to the correct scale (but not perfectly).