Hi Guys
looking for a little conformation that i have understood what i have read;
1. I'm going to be running two 500 motors connected to one ESC,
2. my battery power will be 12v,
3. therefore, each motor has a 2.7amp load with a stall 21amp,
4. each ESC current at double the load amp 5.4, = 10 amp controller,
5. but because i have two motors on one esc, a 20amp controller will be required,
6. Will a 15 amp fuse to protect the esc?
Trucker
( Edit. Admin )
Original post
Hi Guys
looking for a little conformation that i have understood what i have read, im going to be running two 500 motors connected to one ESC, my battery power will be 12v,
so, each motor has a 2.7amp load with a stall 21amp, to decide my ESC # double the load amp 5.4, = 10 amp controller, but because i have two motors on one esc, a 20amp controller will be required, with a 15 amp fuse to protect the esc.