Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: [1]   Go Down

Author Topic: Aeronaut Bellissima  (Read 2541 times)

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Aeronaut Bellissima
« on: April 29, 2020, 10:06:30 pm »

While Im on building the Aeronaut Queen and waiting on some parts I wanted to have
a go at building a small yacht. I picked the Aeronaut Bellissima as I am impressed with
the Queen that I am building and wanted something simple. Frame went together very
quickly and I have just tacked on the mahogany panels. Only thing of note was the front
of the panels where they go into the jig at the front was tight so I relieved the jig slightly
so no damage was caused to the panels.
One thing learnt from the Queen build is don't get glue on the mahogany as it marks the
wood, if you try and sand it out you end up with a pale part in the panel so next job is to
cover the mahogany in masking tape.
Logged

RST

  • Guest
Re: Aeronaut Bellissima
« Reply #1 on: April 29, 2020, 10:40:57 pm »

Nice, and it looks a fair size going off the dvd in the background for scale?
Logged

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #2 on: April 29, 2020, 11:29:22 pm »

Yes its quite big at 1200mm in length.

Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,389
  • Location: S.W. Herts
Re: Aeronaut Bellissima
« Reply #3 on: April 30, 2020, 10:02:49 am »

Hi I have the smaller version, Bella.  Although my one was partly started when I did some swaps for it, the keel on Bella is only 3mm thick.  This is not enough to support the lead weight when the yacht is on her side.  My one had been stored on its side for some time and the keel wood had bent and twisted.

If the Bellisima has a keel less than 6mm thick then I suggest you glue 3mm ply or Bass wood to both sides to strengthen it.  It will need sanding down to an aerofoil section.  More if you want.

Good luck with the build.
Roy


Logged

Martin (Admin)

  • Administrator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 23,361
  • Location: Peterborough, UK
    • Model Boat Mayhem
Re: Aeronaut Bellissima
« Reply #4 on: April 30, 2020, 12:40:59 pm »


Any good recipes in the book you can recommend Martin?   ok2
Logged
"This is my firm opinion, but what do I know?!" -  Visit the Mayhem FaceBook Groups!  &  Giant Models

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #5 on: April 30, 2020, 12:58:58 pm »

I have to say they all look good but you do need to make them!


Trial fitted bottom skins for the hull but appear to be too narrow and short so
going to remake them bespoke. Cant see what Ive done wrong but the Aeronaut
Queen bottom panels were a bit small too.


Just ordered a scroll saw as going to be building a Bearospace Annie so it will
come in handy.

Logged

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #6 on: May 01, 2020, 06:03:15 pm »

Made a start on remaking the bottom skins. Much better fit now.
Logged

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #7 on: May 07, 2020, 05:55:41 pm »

Finished the bottom of the hull, the ply skins I made were a much better fit,
not perfect but much better. Im now working on the inside fitting top inner rails
and a couple of strengthener strips at the stern. Next is to paint with Mr Smiths
penetrating epoxy. Will give it four coats as I did on the Queen build.
Logged

jjolly3

  • Shipmate
  • *
  • Offline Offline
  • Posts: 14
  • Model Boat Mayhem is Great!
  • Location: California, USA
Re: Aeronaut Bellissima
« Reply #8 on: June 04, 2020, 08:49:14 am »

Hello Martin,


How are your Bellissima and Queen builds coming along?  I am considering purchasing my first sail boat.  I will be starting on an Aero-Naut Diva soon.  Thank you for sharing your build.
Logged

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #9 on: June 04, 2020, 09:03:18 am »

Hi


Got side tracked with house building stuff and not done much. Ready to put the deck on the Bellissima
and started painting the bottom of the hull of the Queen. Nice kits but not perfect as i think I have
mention in the build logs. Would I buy another Aeronaut kit? Yes overall nice things but need some
modelling skills to perfect.


Regards Martin.

Logged

jjolly3

  • Shipmate
  • *
  • Offline Offline
  • Posts: 14
  • Model Boat Mayhem is Great!
  • Location: California, USA
Re: Aeronaut Bellissima
« Reply #10 on: June 05, 2020, 04:21:15 am »

Thank you Martin,


I will gain a bit of experience first by wrapping up the Diva build.


Cheers
Logged

roycv

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,389
  • Location: S.W. Herts
Re: Aeronaut Bellissima
« Reply #11 on: June 05, 2020, 10:32:45 am »

Hi this is my Aeronaut Bella with my retro look as a gaff cutter.  The change in sail plan also meant I put a bowsprit in place so that the rig balanced out OK.
Regards
Roy
Logged

MartinGough

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 39
  • Model Boat Mayhem is Great!
  • Location: Cheshire
Re: Aeronaut Bellissima
« Reply #12 on: June 05, 2020, 11:13:47 am »

Very nice.

Logged
Pages: [1]   Go Up
 

Page created in 0.083 seconds with 21 queries.