Thank you both.
Ian sent me files today but I need to get them printed as I can't possibly work from a pc screen.
My problem to deal with is getting them to 1:32 and I'm not familiar with doing this.
The general arrangement drawing is excellent but it's scaled at 1:75 1:1 printed at A0
The CAD files again are a dilemma for me but I will get there eventually.
One thing I have realised quite quickly is that I will not need many of the frames of which there are about 70 spaced at 500mm intervals. These are for strength that I don't need on a scale model, I only need enough to form the correct shape skin. On my model the frames would be approx 16mm apart and with 5mm ply that would be folly so it's a case of exercising common sense.
Hull lines plan is 1:50 1:1 printed at A1
Ian does not have details of the props but he agrees with me that the port side will be LH and the others RH.
Meantime I'm continuing the Mercantic planking.