Model Boat Mayhem

Please login or register.

Login with username, password and session length.
Pages: 1 2 [3] 4   Go Down

Author Topic: HMS Glory  (Read 13064 times)

raflaunches

  • Global Moderator
  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 3,732
  • The Penguins are coming!!!
  • Location: Back in the UK, Kettering, Northants
Re: HMS Glory
« Reply #50 on: October 28, 2023, 02:51:13 pm »

Derek


That model I took a picture of is the one being built by Gingyer. It’s extremely good :-))
Logged
Nick B

Help! The penguins have stolen my sanity, and my hot water bottle!

Illegitimi non carborundum!

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #51 on: October 29, 2023, 08:41:49 pm »

ahh... right i get you
the props are handed i took them off for painting and quickly put them on afterwards.
i need to take them back off again so never checked the orientation and just crossed them over but they
are a handed pair :-))
Logged

derekwarner

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 9,538
  • Location: Wollongong Australia
Re: HMS Glory
« Reply #52 on: October 29, 2023, 10:23:14 pm »

You must also admit I have a pretty good eye for detail  %)  ....when picking out that Carrier at the Blackpool Show and recognising similarities with your vessel  {-)
Logged
Derek Warner

Honorary Secretary [Retired]
Illawarra Live Steamers Co-op
Australia
www.ils.org.au

ErikvG

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • I love technology and engineering!
  • Location: Culemborg, Netherlands
Re: HMS Glory
« Reply #53 on: November 01, 2023, 10:41:47 am »

very impressive build!
Maybe this picture helps in detailling the island and bridge. The picture is from HMAS Sydney (basically a Majestic class, but the island shape is the same). If you want more pictures, I just have a small selection of HMAS Vengeance and HMAS Sydney pictures in high-res. Just mail me directly.

The Dutch National Archives have a lot of drawings of the (reconstructed) HNLMS Karel Doorman, some of them might still be useful. https://www.nationaalarchief.nl/onderzoeken/archief/4.MST (Google translate is your friend, look for drawings nr. 3190-3233).
Logged

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #54 on: November 01, 2023, 08:32:03 pm »

Thanks Erik
The website has been super for information on the boat decks and other hull areas since they were the same.
Glory being a colossus class had a different superstructure layout than the Majestic class.
The majestic class had an enclosed bridge and a much smaller bridge gallery.
In the original colossus class the bridge gallery was wrapped around the superstructure and the top deck was open until the 1950s, glory only had hers closed in on the way to Korea before that it had a canvas cover over the bridge.
Logged

ErikvG

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • I love technology and engineering!
  • Location: Culemborg, Netherlands
Re: HMS Glory
« Reply #55 on: November 01, 2023, 09:10:35 pm »

Good to read that the website is helpful,Here is a picture of the bridge of HMAS Vengeance with some people, including my F-i-L in the way ;-). HMAS Vengeance was indeed a Colossus class and even one of the longest surviving vessels of the class.
Logged

PJM

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem Forum is Great!
  • Location: Fareham
Re: HMS Glory
« Reply #56 on: November 01, 2023, 10:56:01 pm »

My dad served on HMS Venerable during WWII.
Logged

ErikvG

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • I love technology and engineering!
  • Location: Culemborg, Netherlands
Re: HMS Glory
« Reply #57 on: November 03, 2023, 09:25:10 am »

My dad served on HMS Venerable during WWII.
HMS Venerable was sold the the Netherlands and served as 'HNLMS Karel Doorman'. The Dutch archives have an impressive set of downloadable plans of her as mentioned above  ok2 .
Logged

PJM

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • Model Boat Mayhem Forum is Great!
  • Location: Fareham
Re: HMS Glory
« Reply #58 on: November 03, 2023, 09:49:20 am »

Yes Venerable was sold to the Dutch who later sold her to the Argentinians and she became their flagship 25 de mayo.
Logged

ErikvG

  • Shipmate
  • *
  • Offline Offline
  • Posts: 19
  • I love technology and engineering!
  • Location: Culemborg, Netherlands
Re: HMS Glory
« Reply #59 on: November 03, 2023, 10:01:59 am »

Indeed, the interesting part is that HMS Leviathan provided new machinery for HMS Karel Doorman , prior to her sale to Argentina. HMS Eviathan was scrapped shortly after.
Logged

littoralcombat

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 139
  • Location: Secret Harbour, Western Australia
Re: HMS Glory
« Reply #60 on: November 12, 2023, 03:54:14 am »


They increased the power in the engines but the length of the starboard shaft had some significant vibration issues
So they fitted a 4 bladed prop which then allowed for lower revs for the same output.


When I get home I will share a picture of one in dry dock it’s definitely weird.
A picture of HMAS Sydney, Majestic Class, started life as HMS Terrible, the only Aircraft Carrier built at Devonport Royal Naval Dockyard.
I have read that the issues with excessive vibration were because the Starboard shaft-line in both classes was longer than the Port side, due to the staggered main machinery arrangement and the RN's preference of using 3-bladed propellers. This enabled high shaft RPM.
The issue came to a head when HMS Pioneer (Colossus Class), conducting yard sea trials, suffered a catastrophic Starboard shaft failure, resulting in substantial damage in one of the machinery spaces. The solution, as you have stated above Gingyer, was to fit 4-bladed propellers to this shaft so the rpm could be reduced whilst maintaining required power/thrust.
Nige
Logged

Akira

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 613
  • Model Boat Mayhem is Great!
  • Location: Hope, Maine USA
Re: HMS Glory
« Reply #61 on: November 12, 2023, 12:50:31 pm »

I have NEVER seen that before. How interesting. I wonder if any other ships dealt with shaft vibration in such a manner. I am aware that props were often changed to address the issue, but, at least in USN, it was done on both port and starboard at the same time. The South Dakota class battleships ran different props, four blade on the inboard shafts, I believe, and five blade on the outboard.*(Maybe the other way around, not enough coffee yet).
Logged

Colin Bishop

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 12,356
  • Location: SW Surrey, UK
Re: HMS Glory
« Reply #62 on: November 12, 2023, 02:26:12 pm »

Yes, very interesting indeed.

Colin
Logged

littoralcombat

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 139
  • Location: Secret Harbour, Western Australia
Re: HMS Glory
« Reply #63 on: November 14, 2023, 12:10:51 pm »

HMAS Melbourne showing the same propeller arrangement. She began life as HMS Majestic.
Nige
Logged

ballastanksian

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,466
  • Model Boat Mayhem inspires me!
  • Location: Crewkerne
Re: HMS Glory
« Reply #64 on: November 14, 2023, 10:18:16 pm »

What interesting stern openings.
Logged
Pond weed is your enemy

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #65 on: November 15, 2023, 10:51:51 am »

What interesting stern openings.


Each ship was different too which has been weird and they were changed a lot so has been
Some serious investigation to find the correct layout for Glory and also the catwalk above changed from ship to ship.


I also found out that the 2 buldges on each corner were designed for depth charge racks to
Be fitted to the ships. 
Logged

ballastanksian

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,466
  • Model Boat Mayhem inspires me!
  • Location: Crewkerne
Re: HMS Glory
« Reply #66 on: November 17, 2023, 03:13:00 pm »

And there was me thinking they were for Oerlikons!


So if so fitted, they had to find room for ASDIC and it's operators etc as well as their intended role as Carriers? Blimey!
Logged
Pond weed is your enemy

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #67 on: November 17, 2023, 10:46:39 pm »

And there was me thinking they were for Oerlikons!


So if so fitted, they had to find room for ASDIC and it's operators etc as well as their intended role as Carriers? Blimey!


I have seen drawings of the Australian carriers and they showed Bofors fitted there.
Logged

ballastanksian

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,466
  • Model Boat Mayhem inspires me!
  • Location: Crewkerne
Re: HMS Glory
« Reply #68 on: November 17, 2023, 11:08:24 pm »

They look like classic AA gun bulges.
Logged
Pond weed is your enemy

littoralcombat

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 139
  • Location: Secret Harbour, Western Australia
Re: HMS Glory
« Reply #69 on: November 18, 2023, 10:43:45 pm »


I have seen drawings of the Australian carriers and they showed Bofors fitted there.
You are correct Gingyer. Certainly during her time off Korea and later as a Vietnam War troop transport, HMAS Sydney had 40mm Bofors mounts fitted in those locations. Mainly to counter hostile surface-craft, given the poor arcs of fire which would severely limit usefulness against aircraft.
Nige
Logged

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #70 on: January 16, 2024, 09:12:35 pm »


Hi all,
some updates required.


I have been making the 281 radar which sits at the back of the superstructure.











lastly I have 3D printed the seaplane handling crane that sits on the deck.














Logged

ballastanksian

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 6,466
  • Model Boat Mayhem inspires me!
  • Location: Crewkerne
Re: HMS Glory
« Reply #71 on: January 20, 2024, 05:04:20 pm »

Impressive bit of soldering there matey! The crane looks good as well. I assume you didn't fancy soldering dozens of angled pieces together  %%
Logged
Pond weed is your enemy

Rob47

  • Full Mayhemer
  • *****
  • Offline Offline
  • Posts: 1,094
  • Model Boat Mayhem is Great!
  • Location: Gloucester
Re: HMS Glory
« Reply #72 on: January 20, 2024, 05:22:21 pm »

Hi, would that crane print at 1/144 scale?




 Bob
Logged
I will finish this model

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #73 on: January 21, 2024, 03:59:47 pm »

Hi, would that crane print at 1/144 scale?




 Bob


yes, It could be a simple re-scale
Logged

gingyer

  • Full Mayhemer
  • *****
  • Online Online
  • Posts: 1,697
  • Location: Glasgow
Re: HMS Glory
« Reply #74 on: January 21, 2024, 04:00:30 pm »

Impressive bit of soldering there matey! The crane looks good as well. I assume you didn't fancy soldering dozens of angled pieces together  %%


NO, my fingers were complaining a bit after the radar  {-)
Logged
Pages: 1 2 [3] 4   Go Up
 

Page created in 0.094 seconds with 22 queries.