Topic: Graupner Silver Bullet rigger (Read 3054 times)

Doubledog · « **on:** October 22, 2007, 06:26:23 pm »

Hi Guys,..

I've bought my first real fast electro the other day and should be here soon. Its a Graupner Silver Bullet with Lehner Basic 5300 brushless. Picked up a new ESC on ebay.... Mystery 80A. Will be running 6 cell 3300 NiMh packs. Not familiar with all the LiPo technology yet so I'll run these cells till the desire for more speed bites.

Don't have much experience with FE other than an MHZ Geko (I built) and a few other little peanut boats to chase down the Gassers when they stall in the lake.

Chat later,
Jamie

Bridkid · « **Reply #1 on:** October 23, 2007, 08:37:05 pm »

Hi Jamie.

Hope you can make sense of the 'Mystery' ESC. Good name that, because it's a complete mystery to me how to programme it. It comes set for Lipos from the factory and I failed dismally with mine, hope you have more luck.
Cheers,
Ian.

Doubledog · « **Reply #2 on:** October 24, 2007, 07:07:55 am »

Ian,
These are the instructions I've got. Have you taken a look at them?

http://www.rcuniverse.com/forum/m_5568120/tm.htm

Doubledog · « **Reply #3 on:** October 24, 2007, 07:07:55 am »

Ian,
These are the instructions I've got. Have you taken a look at them?

http://www.rcuniverse.com/forum/m_5568120/tm.htm

News:

Author Topic: Graupner Silver Bullet rigger (Read 3054 times)

Doubledog

Graupner Silver Bullet rigger

Bridkid

Re: Graupner Silver Bullet rigger

Doubledog

Re: Graupner Silver Bullet rigger

Doubledog

Re: Graupner Silver Bullet rigger