Technical, Techniques, Hints, and Tips > Glue etc.

UV curing clear resin for glazing portholes.

<< < (2/2)

tonyH:
Hi All and many thanks for the input.

The ones I want to glaze are sealed from the back and what I'm after is, effectively, a crystal clear,self-hardening, varnish that will not soften at a thickness of about 2mm.  I don't think that the glue and glaze type will harden fully unless I use loads of layers so I reckon the UV stuff is worth a go.I'll get a torch John, they've got other pet-orientated uses. They're cheap enough as long as the job doesn't need the wattage of a tanning booth. I can then report back if anyone is interested?
Cheers
Tony :-))

colin-d:
I used glue and glaze on all my portholes...  small or large..

Navigation

[0] Message Index

[*] Previous page